EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Microstructure and Properties of Micro/Nano-Scale (TiB2 + TiC)/Al Composites Prepared by Ti-B4C Reactive Sintering and Spark Plasma Sintering

Wenchao Huang, Dongting Li, Renquan Wang iD, Ying Liu

Materials · 04.04.2026 · 19 (7) · 1449

DOI: 10.3390/ma19071449 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Materials, online erschienen am 04.04.2026. Verfasst von Wenchao Huang und 3 weiteren Autor:innen. Beteiligte Einrichtung: College of Materials Science and Engineering, Sichuan University, Chengdu 610065, China. Die Arbeit nennt 43 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Sichuan Science and Technology Program, New functional materials and applications of rare earth vanadium titanium.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

In this work, micro/nano-scale (TiB2 + TiC)/Al composites with reinforcement contents ranging from 0 to 30 wt.% were fabricated by the combination of Ti-B4C reactive sintering and spark plasma sintering (SPS). The results indicate that a sintering temperature of 1400 °C is essential for achieving a complete reaction between Ti and B4C, successfully producing a bimodal TiB2-TiC reinforcement consisting of nano-scale and micro-scale particles. Microstructure analysis reveals that the addition of micro/nano-scale TiB2 and TiC ceramic particles significantly refines the grain size of the Al matrix from 11.52 μm in pure Al to 1.09 μm in the 30 wt.% (TiB2 + TiC)/Al composite. As the TiB2 and TiC contents increase, Vickers hardness and compressive yield strength increase progressively, while the uniform compressive plastic strain first increases and then decreases. The 20 wt.% (TiB2 + TiC)/Al composite demonstrates the optimal comprehensive properties, with a compressive yield strength of 196.4 ± 6.1 MPa, an ultimate strength of 914.6 ± 20.1 MPa, and a uniform plastic strain of ~73.2%, as well as minimal wear rates of (3.143 ± 0.194) × 10−4 mm3/(N·m), 1.676 ± 0.251× 10−3 mm3/(N·m) and (3.093 ± 0.335) × 10−3 mm3/(N·m) at 1 N, 3 N, and 5 N, respectively. This improvement stems from the combined effects of grain refinement, dispersion strengthening, enhanced load-bearing capacity and reduced adhesive wear via the TiB2 and TiC reinforcements.

Schlagwörter

Stichwörter der Autor:innen

(TiB2 + TiC)/Al compositesmechanical propertiesmicro/nano-scalemicrostructuretribological properties

Autor:innen und Institutionen

  • College of Materials Science and Engineering, Sichuan University, Chengdu 610065, China.

ORCID-Profile: Renquan Wang

Förderung

  • Sichuan Science and Technology Program
  • New functional materials and applications of rare earth vanadium titanium

Zitieren

APA

Huang, W., Li, D., Wang, R., & Liu, Y. (2026). Microstructure and Properties of Micro/Nano-Scale (TiB2 + TiC)/Al Composites Prepared by Ti-B4C Reactive Sintering and Spark Plasma Sintering. Materials, 19(7), 1449. https://doi.org/10.3390/ma19071449

Vancouver

Huang W, Li D, Wang R, Liu Y. Microstructure and Properties of Micro/Nano-Scale (TiB2 + TiC)/Al Composites Prepared by Ti-B4C Reactive Sintering and Spark Plasma Sintering. Materials. 2026;19(7):1449. doi:10.3390/ma19071449

BibTeX
@article{Huang2026,
  author = {Huang, Wenchao and Li, Dongting and Wang, Renquan and Liu, Ying},
  title = {Microstructure and Properties of Micro/Nano-Scale (TiB2 + TiC)/Al Composites Prepared by Ti-B4C Reactive Sintering and Spark Plasma Sintering},
  journal = {Materials},
  year = {2026},
  volume = {19},
  number = {7},
  pages = {1449},
  doi = {10.3390/ma19071449}
}
Kostenlos starten →