EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Effect of Directional Solidification on Microstructural Evolution and Properties of GH3625 Alloy

Yanqin Zhang, Zhi Jia, Yafei Liu

Materials · 03.04.2026 · 19 (7) · 1442

DOI: 10.3390/ma19071442 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Materials, online erschienen am 03.04.2026. Verfasst von Yanqin Zhang und 2 weiteren Autor:innen. Beteiligte Einrichtung: State Key Laboratory of Advanced Processing and Recycling of Nonferrous Metals, Lanzhou University of Technology, Lanzhou 730050, China. Die Arbeit wurde bisher 1-mal zitiert (Crossref) und nennt 25 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: This work was supported by the Gansu Province joint research Fund project, National Key Research and Development Program, Major Special Projects of Science and Technology in Gansu Province.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Nickel-based superalloy GH3625 is widely used in extreme environments due to its exceptional high-temperature strength and corrosion resistance; however, optimizing its comprehensive performance through precise microstructural control remains a critical challenge. In this study, the effect of withdrawal rate (10–200 μm/s) on the microstructural evolution, mechanical properties, and corrosion resistance of GH3625 alloy was investigated using a liquid-metal-cooled directional solidification system. The microstructural characteristics, elemental segregation, and phase distributions were systematically analyzed via OM, SEM, and EDS, followed by uniaxial tensile and electrochemical polarization tests. The results show that with increasing withdrawal rate, the solid–liquid interface morphology evolves from cellular to cellular-dendritic and finally to fully dendritic. Correspondingly, the primary dendrite arm spacing decreases from 270.4 μm to 100.2 μm, and the secondary dendrite arm spacing decreases from 66.5 μm to 12.3 μm. The area fraction of the detrimental Laves phase first decreases and then increases, reaching a minimum at 100 μm/s. Correspondingly, the yield strength increases from 282 MPa to 409 MPa, and the corrosion resistance is optimized at 100 μm/s. The microstructure–property relationships are discussed based on second-phase strengthening theory and microstructural refinement. This study provides a theoretical basis and practical process windows for optimizing directional solidification parameters to achieve enhanced mechanical and corrosion performance in GH3625 alloy.

Schlagwörter

Stichwörter der Autor:innen

Laves phasedirectional solidificationmicrostructure refinementsolid–liquid interface

Autor:innen und Institutionen

  • State Key Laboratory of Advanced Processing and Recycling of Nonferrous Metals, Lanzhou University of Technology, Lanzhou 730050, China.
  • School of Material Science and Engineering, Lanzhou University of Technology, Lanzhou 730050, China.

Förderung

  • This work was supported by the Gansu Province joint research Fund project
  • National Key Research and Development Program
  • Major Special Projects of Science and Technology in Gansu Province
  • National Nature Science Foundation of China
  • Lanzhou University of Technology Support plan for Distinguished Young Scholars

Zitieren

APA

Zhang, Y., Jia, Z., & Liu, Y. (2026). Effect of Directional Solidification on Microstructural Evolution and Properties of GH3625 Alloy. Materials, 19(7), 1442. https://doi.org/10.3390/ma19071442

Vancouver

Zhang Y, Jia Z, Liu Y. Effect of Directional Solidification on Microstructural Evolution and Properties of GH3625 Alloy. Materials. 2026;19(7):1442. doi:10.3390/ma19071442

BibTeX
@article{Zhang2026,
  author = {Zhang, Yanqin and Jia, Zhi and Liu, Yafei},
  title = {Effect of Directional Solidification on Microstructural Evolution and Properties of GH3625 Alloy},
  journal = {Materials},
  year = {2026},
  volume = {19},
  number = {7},
  pages = {1442},
  doi = {10.3390/ma19071442}
}
Kostenlos starten →