Electrochemical Activity and Corrosion Behavior of Ultrafine-Grained Ti-xMo Alloys Processed via Powder Metallurgy
Materials · 03.04.2026 · 19 (7) · 1431
DOI: 10.3390/ma19071431 ↗Kurz gefasst
Fachartikel in der Zeitschrift Materials, online erschienen am 03.04.2026. Verfasst von Katarzyna Arkusz und 4 weiteren Autor:innen. Beteiligte Einrichtung: Department of Biomedical Engineering, Faculty of Engineering and Technology, University of Zielona Gora, 9 Licealna Street, 65-417 Zielona Gora, Pola…. Die Arbeit wurde bisher 2-mal zitiert (Crossref) und nennt 40 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).
Abstract (Originalsprache)
Titanium alloys are widely used for biomedical implants due to their favorable mechanical properties, corrosion resistance, and biocompatibility. However, the development of multifunctional implant materials requires not only structural stability but also controlled electrochemical responsiveness, an important property for electrochemical sensing. This study developed ultrafine-grained Ti–xMo alloys (x = 28 and 31 wt.%) via mechanical alloying followed by powder metallurgy to investigate the effect of high Mo content on phase stability, corrosion behavior, and electrochemical sensing response. Both alloys exhibited predominantly β-phase microstructures, with β-phase fractions exceeding 93%, confirming effective stabilization at elevated Mo concentrations. Electrochemical tests conducted in 0.01 M PBS and Ringer’s solution revealed that pure Ti exhibited the highest impedance modulus and lowest corrosion current density, indicating superior passive film barrier properties. In contrast, high-Mo alloys showed reduced polarization resistance and increased charge-transfer contribution, associated with modifications in passive film defect chemistry and electronic properties induced by Mo enrichment. Among the investigated compositions, Ti-31 wt.% Mo demonstrated improved electrochemical stability compared to Ti-28 wt.% Mo, exhibiting lower corrosion current density and higher impedance values within the high-Mo regime. Cyclic voltammetry performed in 0.01 M PBS containing 1 mM K3[Fe(CN)6] confirmed enhanced heterogeneous electron-transfer capability for Mo-rich alloys relative to pure Ti. Overall, Ti-31 wt.% Mo provides a balanced combination of β-phase stabilization, moderate corrosion resistance, and improved electrochemical responsiveness potentially suitable for sensing interfaces.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- Department of Biomedical Engineering, Faculty of Engineering and Technology, University of Zielona Gora, 9 Licealna Street, 65-417 Zielona Gora, Poland.
- The Doctoral School of Exact and Technical Sciences, University of Zielona Gora, 65-417 Zielona Gora, Poland.
ORCID-Profile: Katarzyna Arkusz, Kamila Pasik, Ewa Paradowska, Aleksandra Jędrzejewska, Mieczysław Jurczyk
Zitieren
APA
Arkusz, K., Pasik, K., Paradowska, E., Jędrzejewska, A., & Jurczyk, M. (2026). Electrochemical Activity and Corrosion Behavior of Ultrafine-Grained Ti-xMo Alloys Processed via Powder Metallurgy. Materials, 19(7), 1431. https://doi.org/10.3390/ma19071431
Vancouver
Arkusz K, Pasik K, Paradowska E, Jędrzejewska A, Jurczyk M. Electrochemical Activity and Corrosion Behavior of Ultrafine-Grained Ti-xMo Alloys Processed via Powder Metallurgy. Materials. 2026;19(7):1431. doi:10.3390/ma19071431
BibTeX
@article{Arkusz2026,
author = {Arkusz, Katarzyna and Pasik, Kamila and Paradowska, Ewa and Jędrzejewska, Aleksandra and Jurczyk, Mieczysław},
title = {Electrochemical Activity and Corrosion Behavior of Ultrafine-Grained Ti-xMo Alloys Processed via Powder Metallurgy},
journal = {Materials},
year = {2026},
volume = {19},
number = {7},
pages = {1431},
doi = {10.3390/ma19071431}
}
EUVIMED