EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

High-Stability Lithium Metal Batteries Enabled by AZO-Modified Separators

Shaojiang Hong, Ruiqin Tan iD, Jia Li, Jinhua Huang, Weijie Song iD

Materials · 03.04.2026 · 19 (7) · 1429

DOI: 10.3390/ma19071429 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Materials, online erschienen am 03.04.2026. Verfasst von Shaojiang Hong und 4 weiteren Autor:innen. Beteiligte Einrichtung: Faculty of Electrical Engineering and Computer Science, Ningbo University, Ningbo 315211, China. Die Arbeit nennt 40 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: The Pioneer and Leading Goose R&D Program of Zhejiang, Ningbo Key Scientific and Technological Project, Pioneer and Leading Goose R&D Program of Zhejiang.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The commercialization of lithium metal batteries is hindered by critical challenges such as uncontrollable lithium dendrite growth and interfacial instability. Constructing functional nanocoatings on separator surfaces represents an effective strategy to address these issues. In this study, a uniform aluminum-doped zinc oxide (AZO) modification layer was deposited on the separator via magnetron sputtering to enhance the electrochemical performance and safety of lithium metal batteries. The AZO layer combines the functions of a physical barrier and an interfacial regulator. On one hand, it effectively suppresses lithium dendrite penetration through the separator. On the other hand, its surface properties facilitate uniform lithium-ion transport and reduce the deposition overpotential. Experimental results demonstrate that the symmetric cells employing AZO-modified separators exhibit significantly reduced and stable lithium deposition overpotentials. In full cells assembled with a nickel cobalt aluminum (NCA) cathode, the system demonstrates higher specific capacity and notably extended cycle life compared to cells using unmodified polyethylene (PE) separators. This work proposes a practical strategy based on AZO-modified separators, offering a promising pathway toward the development of next-generation lithium metal batteries with high energy density and improved safety.

Schlagwörter

Stichwörter der Autor:innen

AZOlithium dendriteslithium metal batteriesmagnetron sputteringseparator modification

Autor:innen und Institutionen

  • Faculty of Electrical Engineering and Computer Science, Ningbo University, Ningbo 315211, China.
  • Ningbo Institute of Materials Technology and Engineering, Chinese Academy of Sciences, Ningbo 315201, China.

ORCID-Profile: Ruiqin Tan, Weijie Song

Förderung

  • The Pioneer and Leading Goose R&D Program of Zhejiang
  • Ningbo Key Scientific and Technological Project
  • Pioneer and Leading Goose R&D Program of Zhejiang

Zitieren

APA

Hong, S., Tan, R., Li, J., Huang, J., & Song, W. (2026). High-Stability Lithium Metal Batteries Enabled by AZO-Modified Separators. Materials, 19(7), 1429. https://doi.org/10.3390/ma19071429

Vancouver

Hong S, Tan R, Li J, Huang J, Song W. High-Stability Lithium Metal Batteries Enabled by AZO-Modified Separators. Materials. 2026;19(7):1429. doi:10.3390/ma19071429

BibTeX
@article{Hong2026,
  author = {Hong, Shaojiang and Tan, Ruiqin and Li, Jia and Huang, Jinhua and Song, Weijie},
  title = {High-Stability Lithium Metal Batteries Enabled by AZO-Modified Separators},
  journal = {Materials},
  year = {2026},
  volume = {19},
  number = {7},
  pages = {1429},
  doi = {10.3390/ma19071429}
}
Kostenlos starten →