EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Effect of Differential Speed Ratio on the Microstructural Evolution and Mechanical Properties of Asynchronously Rolled 7075 Aluminum Alloy

Lanshun Wei, Xiaowei Lian, Liping Deng, Bingshu Wang iD

Materials · 01.04.2026 · 19 (7) · 1412

DOI: 10.3390/ma19071412 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Materials, online erschienen am 01.04.2026. Verfasst von Lanshun Wei und 3 weiteren Autor:innen. Beteiligte Einrichtung: School of Advanced Manufacturing, Fuzhou University, Fuzhou 362200, China. Die Arbeit nennt 45 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Natural Science Foundation of Fujian Province of China, Collaborative Innovation Platform Project of Fu-Xia-Quan National Independent Innovation Demonstration Zone.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The increasing demands of application conditions urgently call for process innovations in high-performance 7xxx aluminum alloys. This study investigated the effect of differential speed rolling (DSR) on the microstructural evolution and mechanical properties of 7075 aluminum alloy subjected to DSR with a total reduction of 60%, followed by isothermal aging at 120 °C for 24 h. The results show that DSR promotes the development of grain refinement, defect accumulation, and deformation texture, while the corresponding strengthening effect exhibits a non-monotonic dependence on speed ratio. Among all conditions, the DSR2.0 sample exhibits the most favorable microstructure, characterized by the highest kernel average misorientation (KAM) value, the strongest deformation texture, and the finest as well as most densely distributed intragranular η′ precipitates. Accordingly, the DSR2.0 sample achieves the optimal strength–ductility balance, with a yield strength, ultimate tensile strength, elongation, and hardness of 582.26 MPa, 648.43 MPa, 10.75%, and 199.8 HV, respectively. Specifically, the deterioration in the properties of the DSR2.5 sample is attributed to localized recovery, shear inhomogeneity and coarsening of precipitates. The differential speed ratio enables effective optimization of the 7075 aluminum alloy by regulating the evolution of grains, dislocations, precipitate phases, and texture, among which precipitation strengthening is the dominant calculated contribution. Therefore, an appropriate differential speed ratio is key to achieving performance optimization.

Schlagwörter

Stichwörter der Autor:innen

7075 aluminum alloydifferential speed rollingmechanical propertiesmicrostructure

Autor:innen und Institutionen

  • School of Advanced Manufacturing, Fuzhou University, Fuzhou 362200, China.
  • College of Materials Science and Engineering, Fuzhou University, Fuzhou 350108, China.

ORCID-Profile: Bingshu Wang

Förderung

  • Natural Science Foundation of Fujian Province of China
  • Collaborative Innovation Platform Project of Fu-Xia-Quan National Independent Innovation Demonstration Zone

Zitieren

APA

Wei, L., Lian, X., Deng, L., & Wang, B. (2026). Effect of Differential Speed Ratio on the Microstructural Evolution and Mechanical Properties of Asynchronously Rolled 7075 Aluminum Alloy. Materials, 19(7), 1412. https://doi.org/10.3390/ma19071412

Vancouver

Wei L, Lian X, Deng L, Wang B. Effect of Differential Speed Ratio on the Microstructural Evolution and Mechanical Properties of Asynchronously Rolled 7075 Aluminum Alloy. Materials. 2026;19(7):1412. doi:10.3390/ma19071412

BibTeX
@article{Wei2026,
  author = {Wei, Lanshun and Lian, Xiaowei and Deng, Liping and Wang, Bingshu},
  title = {Effect of Differential Speed Ratio on the Microstructural Evolution and Mechanical Properties of Asynchronously Rolled 7075 Aluminum Alloy},
  journal = {Materials},
  year = {2026},
  volume = {19},
  number = {7},
  pages = {1412},
  doi = {10.3390/ma19071412}
}
Kostenlos starten →