EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Optimizing Depth-of-Discharge in Li-Rich Halide All-Solid-State Batteries for Enhanced Capacity and Cycling Stability

Yunan Zhou, Naibo Zhao, Xin Chen, Meiling Fan, Yang Wu, Jingchao Liu, Zhen Wu, Xiangxin Guo iD

Materials · 01.04.2026 · 19 (7) · 1409

DOI: 10.3390/ma19071409 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Materials, online erschienen am 01.04.2026. Verfasst von Yunan Zhou und 7 weiteren Autor:innen. Beteiligte Einrichtung: College of Materials Science and Engineering, Qingdao University, Qingdao 266071, China. Die Arbeit nennt 51 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: the National Key R & D Program of China, National Key R & D Program of China.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Although halide solid electrolytes (HSEs) demonstrate a higher voltage window and superior interfacial stability toward Li-rich layered oxides (LLOs) compared to sulfide systems, HSE-based all-solid-state lithium batteries (HSE-ASSLBs) still face a fundamental trade-off between achieving high capacity and maintaining cycling stability. To resolve this issue, a rational adjustment of the depth-of-discharge (DOD) via discharge cut-off voltage control is proposed. Analysis of dQ/dV profiles and post-cycled electrodes indicates that excessive DOD (lower cut-off voltages) aggravates structural degradation and interfacial side reactions, whereas insufficient DOD (higher cut-off voltage) fails to fully utilize the compensatory capacity from low-voltage redox couples. Notably, an optimized cut-off voltage of 2.6 V activates a stable low-voltage redox reaction centered around 2.85 V, which effectively offsets high-voltage capacity loss while suppressing unfavorable interfacial evolution. As a result, the ASSLB configured with a Li1.2Ni0.13Mn0.54Co0.13O2 cathode and a Li2.75In0.75Zr0.25Cl6 HSE delivers an initial discharge capacity of 281.6 mAh g−1 at 1C and achieves significantly improved capacity retention from 71.8% to 86.1% over 300 cycles. This study confirms that DOD regulation offers a simple and effective electrochemical protocol for enabling durable high-capacity output in LLO-based ASSLBs.

Schlagwörter

Stichwörter der Autor:innen

Li-rich layered oxidesall-solid-state batteriesdepth-of-dischargehalide solid electrolyteinterfacial stabilitystructural degradationvoltage decay

Autor:innen und Institutionen

  • College of Materials Science and Engineering, Qingdao University, Qingdao 266071, China.
  • Zhejiang Green Intelligent Transportation Technology Innovation Co., Ltd., Ningbo 315300, China.
  • Zhejiang Automotive Engineering Institute, Zhejiang Geely Holding Group Co., Ltd., Hangzhou 310052, China.
  • Ronggu New Material Technology (Shaoxing) Co., Ltd., Shaoxing 312000, China.

ORCID-Profile: Xiangxin Guo

Förderung

  • the National Key R & D Program of China
  • National Key R & D Program of China

Zitieren

APA

Zhou, Y., Zhao, N., Chen, X., Fan, M., Wu, Y., Liu, J., Wu, Z., & Guo, X. (2026). Optimizing Depth-of-Discharge in Li-Rich Halide All-Solid-State Batteries for Enhanced Capacity and Cycling Stability. Materials, 19(7), 1409. https://doi.org/10.3390/ma19071409

Vancouver

Zhou Y, Zhao N, Chen X, Fan M, Wu Y, Liu J, et al. Optimizing Depth-of-Discharge in Li-Rich Halide All-Solid-State Batteries for Enhanced Capacity and Cycling Stability. Materials. 2026;19(7):1409. doi:10.3390/ma19071409

BibTeX
@article{Zhou2026,
  author = {Zhou, Yunan and Zhao, Naibo and Chen, Xin and Fan, Meiling and Wu, Yang and Liu, Jingchao and Wu, Zhen and Guo, Xiangxin},
  title = {Optimizing Depth-of-Discharge in Li-Rich Halide All-Solid-State Batteries for Enhanced Capacity and Cycling Stability},
  journal = {Materials},
  year = {2026},
  volume = {19},
  number = {7},
  pages = {1409},
  doi = {10.3390/ma19071409}
}
Kostenlos starten →