The Optimization of Corrosion Performance of Al-Zn-Mg-Cu Alloy by Si Addition and Solid Solution Treatment
Materials · 01.04.2026 · 19 (7) · 1406
DOI: 10.3390/ma19071406 ↗Kurz gefasst
Fachartikel in der Zeitschrift Materials, online erschienen am 01.04.2026. Verfasst von Dongwei Zhang und 10 weiteren Autor:innen. Beteiligte Einrichtung: Dongguan Xianghua Hardware Technology Co., Ltd., Dongguan 523000, China. Die Arbeit wurde bisher 1-mal zitiert (Crossref) und nennt 31 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Dong-guan Science and Technology Bureau Project, the China Scholarship Council, Dongguan Science and Technology Bureau Project.
Abstract (Originalsprache)
Achieving a balanced combination of mechanical performance and corrosion resistance remains a critical challenge restricting the broader application of Al–Zn–Mg–Cu alloys in aerospace, marine, and transportation industries. In this investigation, the addition of Si significantly enhances the mechanical properties of the alloy. Among them, the alloy containing 0.35Si has the best corrosion resistance, which is closely related to the transformation of precipitates. A non-monotonic relationship between Si content and corrosion resistance was observed. At low Si levels, the simultaneous precipitation of η, T, and GPB-II phases leads to a large electrochemical potential difference among these phases, which promotes micro-galvanic corrosion. With increasing Si content, the microstructure evolves toward the dominance of GPB-II precipitates, thereby reducing the internal potential difference and improving corrosion resistance. However, excessive addition of Si will lower the equilibrium solid phase temperature, resulting in overburning during the solid solution treatment process and a significant decrease in corrosion resistance. In addition, lowering the solution treatment temperature effectively improves corrosion resistance by suppressing the formation of remelted spheres and low-melting-point brittle phases along grain boundaries. These phases can form strong micro-galvanic couples with the matrix, accelerating anodic dissolution. Therefore, by adding an appropriate amount of Si and optimizing the solid solution temperature, a corrosion-resistant high-strength Al-Zn-Mg-Cu-Si alloy can be obtained. This strategy also provides a broader compositional and heat-treatment design window, which could be further expanded through the incorporation of rare-earth (RE) elements.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- Dongguan Xianghua Hardware Technology Co., Ltd., Dongguan 523000, China.
- College of Materials Science & Engineering, Beijing University of Technology, Beijing 100124, China.
- Department of Chemical and Materials Engineering, The University of Auckland, Auckland 1142, New Zealand.
ORCID-Profile: Yi Lu, Shengping Wen, Wu Wei, Xiaolan Wu, Peng Cao
Förderung
- Dong-guan Science and Technology Bureau Project
- the China Scholarship Council
- Dongguan Science and Technology Bureau Project
- China Scholarship Council
Zitieren
APA
Zhang, D., Lu, Y., Shi, H., Wen, S., Wei, W., Wu, X., Gao, K., Huang, H., Xiong, X., Cao, P., & Nie, Z. (2026). The Optimization of Corrosion Performance of Al-Zn-Mg-Cu Alloy by Si Addition and Solid Solution Treatment. Materials, 19(7), 1406. https://doi.org/10.3390/ma19071406
Vancouver
Zhang D, Lu Y, Shi H, Wen S, Wei W, Wu X, et al. The Optimization of Corrosion Performance of Al-Zn-Mg-Cu Alloy by Si Addition and Solid Solution Treatment. Materials. 2026;19(7):1406. doi:10.3390/ma19071406
BibTeX
@article{Zhang2026,
author = {Zhang, Dongwei and Lu, Yi and Shi, Huijun and Wen, Shengping and Wei, Wu and Wu, Xiaolan and Gao, Kunyuan and Huang, Hui and Xiong, Xiangyuan and Cao, Peng and Nie, Zuoren},
title = {The Optimization of Corrosion Performance of Al-Zn-Mg-Cu Alloy by Si Addition and Solid Solution Treatment},
journal = {Materials},
year = {2026},
volume = {19},
number = {7},
pages = {1406},
doi = {10.3390/ma19071406}
}
EUVIMED