EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Multi-Scale Modeling and Experimental Validation of Thermo-Mechanical Responses in Femtosecond Laser Micromachining of Copper

Jianguo Zhao iD, Xu Han, Fang Dong, Sheng Liu iD

Materials · 31.03.2026 · 19 (7) · 1391

DOI: 10.3390/ma19071391 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Materials, online erschienen am 31.03.2026. Verfasst von Jianguo Zhao und 3 weiteren Autor:innen. Beteiligte Einrichtung: The Institute of Technological Sciences, Wuhan University, Wuhan 430072, China. Die Arbeit wurde bisher 1-mal zitiert (Crossref) und nennt 73 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Key R&D Program of China, National Natural Science Foundation of China, Major Program (JD) of Hubei Province.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Femtosecond laser micromachining is a cornerstone of high-precision manufacturing, yet its multi-scale dynamics require a self-consistent bridging from atomic transitions to macroscopic morphology. This study establishes a multi-scale framework where Density Functional Theory (DFT) calculates temperature-dependent electronic thermal properties to inform both Two-Temperature Model-Molecular Dynamics (TTM-MD) and Finite Element Method (TTM-FEM) simulations. By comparing atomistic and macroscopic results, we systematically investigate the thermal-mechanical responses of copper ablation. The macroscopic TTM-FEM model, employing a removal criterion based on the enthalpy of vaporization, achieves high predictive accuracy for ablation depths in the low-to-medium power range up to 300 mW. However, a significant divergence at higher powers (>400 mW) highlights the physical transition from surface evaporation to phase explosion. Concurrently, the TTM-MD simulations provide microscopic insights into the transient temperature and stress evolution, establishing a physically synchronized link between atomic-scale dynamics and macroscopic results. This work defines the applicability boundaries of evaporation-based macroscopic models and provides a validated predictive tool for optimizing laser processing parameters in precision engineering.

Schlagwörter

Stichwörter der Autor:innen

TTM-FEMTTM-MDlaser ablationmultiscale simulation

Autor:innen und Institutionen

  • The Institute of Technological Sciences, Wuhan University, Wuhan 430072, China.
  • School of Power and Mechanical Engineering, Wuhan University, Wuhan 430072, China.

ORCID-Profile: Jianguo Zhao, Sheng Liu

Förderung

  • National Key R&D Program of China
  • National Natural Science Foundation of China
  • Major Program (JD) of Hubei Province
  • National Natural Science Foundation of China https://ror.org/01h0zpd94

Zitieren

APA

Zhao, J., Han, X., Dong, F., & Liu, S. (2026). Multi-Scale Modeling and Experimental Validation of Thermo-Mechanical Responses in Femtosecond Laser Micromachining of Copper. Materials, 19(7), 1391. https://doi.org/10.3390/ma19071391

Vancouver

Zhao J, Han X, Dong F, Liu S. Multi-Scale Modeling and Experimental Validation of Thermo-Mechanical Responses in Femtosecond Laser Micromachining of Copper. Materials. 2026;19(7):1391. doi:10.3390/ma19071391

BibTeX
@article{Zhao2026,
  author = {Zhao, Jianguo and Han, Xu and Dong, Fang and Liu, Sheng},
  title = {Multi-Scale Modeling and Experimental Validation of Thermo-Mechanical Responses in Femtosecond Laser Micromachining of Copper},
  journal = {Materials},
  year = {2026},
  volume = {19},
  number = {7},
  pages = {1391},
  doi = {10.3390/ma19071391}
}
Kostenlos starten →