EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Tri-Magnesium Phosphate as a Candidate Biocompatible Retarder for Magnesium Potassium Phosphate Cement: Setting Behavior, Mechanical Properties, and Microstructure

Yuanquan Yang, Xiaoyu Ying, Hao Huang, Yunpeng Cui

Materials · 29.03.2026 · 19 (7) · 1354

DOI: 10.3390/ma19071354 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Materials, online erschienen am 29.03.2026. Verfasst von Yuanquan Yang und 3 weiteren Autor:innen. Beteiligte Einrichtung: School of Architecture and Civil Engineering, Liuzhou Institute of Technology, Liuzhou 545616, China. Die Arbeit nennt 36 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Department of Education of Liaoning Province, Green Preparation of Magnesium Oxide and Its Multi-phase Regulation on the Properties of Magnesium Phosphate Cement.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Magnesium potassium phosphate cement (MKPC) is a promising bone repair material but suffers from excessively rapid setting time (typically within minutes) that limits clinical application. This study systematically investigates trimagnesium phosphate (TMP) as a candidate retarding additive for MKPC. TMP was used to partially replace dead-burned magnesium oxide at replacement levels of 0%, 10%, and 15% by mass. The effects of TMP content, water-to-cement ratio (0.17–0.23), and magnesium-to-phosphate molar ratio (4–10) on setting time, fluidity, hydration kinetics, compressive strength, and microstructure were comprehensively evaluated. Results show that TMP effectively extends the setting time from 9–13 min (without TMP) to 10–19 min, providing a working window that may be suitable for biomedical applications requiring extended handling time. Notably, 10% TMP incorporation enhances early compressive strength, with 1-day strength reaching 35.2 MPa compared to 28.5 MPa for control samples. Hydration heat analysis reveals TMP moderates the acid-base reaction kinetics through its slower dissolution rate compared to MgO. Microstructural characterization shows TMP promotes the formation of denser K-struvite crystals with refined microstructure. The optimal TMP dosage of 10% achieves a balanced performance, extending setting time while improving early strength and microstructural densification. These findings establish TMP as an effective retarder for developing MKPC-based materials with potential for biomedical applications, pending further biological validation.

Schlagwörter

Stichwörter der Autor:innen

magnesium potassium phosphate cement (MKPC)potential biocompatibilityretardertrimagnesium phosphate (TMP)

Autor:innen und Institutionen

  • School of Architecture and Civil Engineering, Liuzhou Institute of Technology, Liuzhou 545616, China.
  • School of Materials Science and Engineering, Shenyang Ligong University, Shenyang 110159, China.

Förderung

  • Department of Education of Liaoning Province
  • Green Preparation of Magnesium Oxide and Its Multi-phase Regulation on the Properties of Magnesium Phosphate Cement

Zitieren

APA

Yang, Y., Ying, X., Huang, H., & Cui, Y. (2026). Tri-Magnesium Phosphate as a Candidate Biocompatible Retarder for Magnesium Potassium Phosphate Cement: Setting Behavior, Mechanical Properties, and Microstructure. Materials, 19(7), 1354. https://doi.org/10.3390/ma19071354

Vancouver

Yang Y, Ying X, Huang H, Cui Y. Tri-Magnesium Phosphate as a Candidate Biocompatible Retarder for Magnesium Potassium Phosphate Cement: Setting Behavior, Mechanical Properties, and Microstructure. Materials. 2026;19(7):1354. doi:10.3390/ma19071354

BibTeX
@article{Yang2026,
  author = {Yang, Yuanquan and Ying, Xiaoyu and Huang, Hao and Cui, Yunpeng},
  title = {Tri-Magnesium Phosphate as a Candidate Biocompatible Retarder for Magnesium Potassium Phosphate Cement: Setting Behavior, Mechanical Properties, and Microstructure},
  journal = {Materials},
  year = {2026},
  volume = {19},
  number = {7},
  pages = {1354},
  doi = {10.3390/ma19071354}
}
Kostenlos starten →