EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Screw Withdrawal Resistance from WPC Profiles Used in Door Frame Production

Zbigniew Potok iD, Zdzisław Kwidziński, Marta Pędzik iD, Krzysztof Wiaderek iD, Barbara Prałat iD, Tomasz Rogoziński iD

Materials · 29.03.2026 · 19 (7) · 1351

DOI: 10.3390/ma19071351 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Materials, online erschienen am 29.03.2026. Verfasst von Zbigniew Potok und 5 weiteren Autor:innen. Beteiligte Einrichtung: Department of Furniture Design, Faculty of Forestry and Wood Technology, Poznań University of Life Sciences, 60-637 Poznań, Poland. Die Arbeit nennt 36 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Polish Minister of Science and Higher Education https://ror.org/05dwvd537.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

This study investigates the screw withdrawal resistance (SWR) of hollow wood–plastic composite (WPC) door frames, which serve as moisture-resistant alternatives to traditional wood-based materials. The tested WPC, characterised by a density of 1.33 g/cm3 and a polymer-bound lignocellulosic filler, exhibits superior dimensional stability and low water absorption—under 4% after 24 h of immersion. The research focuses on how the unique chambered geometry of these industrial profiles affects the anchoring of 20 mm conical wood screws used to mount essential fittings such as hinges and lock catches. The SWR was determined using a universal testing machine in accordance with the modified EN 320 standards. Results indicate that the installation location within the profile significantly dictates load-bearing capacity: the band profile (lock catch) achieved an average SWR of 525.65 N, while the beam profile (hinge) averaged only 275.25 N. This performance gap arises because screws anchor only into internal “ribs” rather than the full material depth. Since these values are considerably lower than those of traditional particleboard (~1364–1775 N), the study highlights a critical need to optimise screw dimensions to ensure the structural stability and safety of hollow WPC door systems.

Schlagwörter

Stichwörter der Autor:innen

screw pull-out resistancewood screwswood-based materialswooden doors

Autor:innen und Institutionen

  • Department of Furniture Design, Faculty of Forestry and Wood Technology, Poznań University of Life Sciences, 60-637 Poznań, Poland.
  • PORTA KMI Poland, 84-239 Bolszewo, Poland.
  • Łukasiewicz Research Network-Poznań Institute of Technology, 6 Ewarysta Estkowskiego St., 61-755 Poznań, Poland.

ORCID-Profile: Zbigniew Potok, Marta Pędzik, Krzysztof Wiaderek, Barbara Prałat, Tomasz Rogoziński

Förderung

  • Polish Minister of Science and Higher Education https://ror.org/05dwvd537

Zitieren

APA

Potok, Z., Kwidziński, Z., Pędzik, M., Wiaderek, K., Prałat, B., & Rogoziński, T. (2026). Screw Withdrawal Resistance from WPC Profiles Used in Door Frame Production. Materials, 19(7), 1351. https://doi.org/10.3390/ma19071351

Vancouver

Potok Z, Kwidziński Z, Pędzik M, Wiaderek K, Prałat B, Rogoziński T. Screw Withdrawal Resistance from WPC Profiles Used in Door Frame Production. Materials. 2026;19(7):1351. doi:10.3390/ma19071351

BibTeX
@article{Potok2026,
  author = {Potok, Zbigniew and Kwidziński, Zdzisław and Pędzik, Marta and Wiaderek, Krzysztof and Prałat, Barbara and Rogoziński, Tomasz},
  title = {Screw Withdrawal Resistance from WPC Profiles Used in Door Frame Production},
  journal = {Materials},
  year = {2026},
  volume = {19},
  number = {7},
  pages = {1351},
  doi = {10.3390/ma19071351}
}
Kostenlos starten →