EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Retarding Effect and Hydration Mechanism of Sodium Polyacrylate on Magnesium Potassium Phosphate Cement

Yunpeng Cui, Runqing Liu, Yuanquan Yang, Bo Pang, Yihe Wang

Materials · 28.03.2026 · 19 (7) · 1349

DOI: 10.3390/ma19071349 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Materials, online erschienen am 28.03.2026. Verfasst von Yunpeng Cui und 4 weiteren Autor:innen. Beteiligte Einrichtung: School of Architecture and Civil Engineering, Liuzhou Institute of Technology, Liuzhou 545616, China. Die Arbeit nennt 48 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Magnesium phosphate cement (MPC) is a type of rapid-hardening inorganic cementitious material, which has important application value in rapid road repair, solidification of hazardous and radioactive waste, and other fields. However, it suffers from excessively fast setting and hardening and a short working time retention, which severely restrict its engineering application. Therefore, the development of high-efficiency set retarders is of great significance for optimizing MPC performance, enhancing its construction workability, and expanding its application scope. In this study, the effect of sodium polyacrylate (PAAS) on the setting and hardening of magnesium potassium phosphate cement (MKPC) was investigated by testing the setting time and fluidity at a low water-to-solid ratio (W/S = 0.18). Through pH and electrical conductivity measurements, combined with XRD, TG/DTG, and FTIR characterizations, we elucidated the retarding mechanism of PAAS on MKPC using a high water-to-solid ratio (W/S = 10). The results indicate that the setting time of MKPC is positively correlated with the PAAS dosage, whereas the fluidity and compressive strength exhibited a negative correlation with the PAAS dosage. Additionally, PAAS reduces the total heat release and the heat release rate of MKPC. The addition of PAAS increased the pH of the suspension, thereby reducing the solubility of MgO, but did not inhibit the dissolution of KH2PO4. The carboxylate groups in PAAS chemically reacted with Mg2+ on the surface of MgO to form magnesium carboxylate complexes (Mg-PAA), which remained as precipitates in the MKPC suspension system, thus reducing the amount of available Mg2+ participating in the hydration reaction. Furthermore, PAAS had no effect on the final precipitate composition at the end of hydration, which was composed of MgKPO4·6H2O and Mg3(PO4)2·22H2O in all cases.

Schlagwörter

Stichwörter der Autor:innen

hydrationmagnesium phosphate cementreaction mechanismsodium polyacrylate

Autor:innen und Institutionen

  • School of Architecture and Civil Engineering, Liuzhou Institute of Technology, Liuzhou 545616, China.

Zitieren

APA

Cui, Y., Liu, R., Yang, Y., Pang, B., & Wang, Y. (2026). Retarding Effect and Hydration Mechanism of Sodium Polyacrylate on Magnesium Potassium Phosphate Cement. Materials, 19(7), 1349. https://doi.org/10.3390/ma19071349

Vancouver

Cui Y, Liu R, Yang Y, Pang B, Wang Y. Retarding Effect and Hydration Mechanism of Sodium Polyacrylate on Magnesium Potassium Phosphate Cement. Materials. 2026;19(7):1349. doi:10.3390/ma19071349

BibTeX
@article{Cui2026,
  author = {Cui, Yunpeng and Liu, Runqing and Yang, Yuanquan and Pang, Bo and Wang, Yihe},
  title = {Retarding Effect and Hydration Mechanism of Sodium Polyacrylate on Magnesium Potassium Phosphate Cement},
  journal = {Materials},
  year = {2026},
  volume = {19},
  number = {7},
  pages = {1349},
  doi = {10.3390/ma19071349}
}
Kostenlos starten →