EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Effect of Ce Treatment on the Austenite Grain Growth Behavior of High-Strength Low-Alloy Steel During Heating Process Before Rolling

Fei Huang iD, Jing Li, Bin Lu iD

Materials · 28.03.2026 · 19 (7) · 1343

DOI: 10.3390/ma19071343 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Materials, online erschienen am 28.03.2026. Verfasst von Fei Huang und 2 weiteren Autor:innen. Beteiligte Einrichtung: State Key Laboratory of Advanced Metallurgy, University of Science and Technology Beijing, 30 Xueyuan Road, Haidian District, Beijing 100083, China. Die Arbeit wurde bisher 1-mal zitiert (Crossref) und nennt 41 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Central Government Guided Local Science and Technology Development Fund, The independent research and development project of State Key Laboratory of Advanced Metallurgy, independent research and development project of State Key Laboratory of Advanced Metallurgy.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

By adding Ce to high-strength low-alloy steel, the effects of heating parameters and Ce on grain growth were examined through in situ observation and dynamic analysis of grain growth behavior during heating, combined with precipitated phase analysis and pinning force calculations. In situ observation of the heating process revealed the behavior of grain growth and grain boundary migration in real time, providing an intuitive and accurate illustration of the effect of Ce on grain growth behavior. The mechanism of Ce’s role in refining austenite grains was clarified. The results revealed that at 1050 °C, Ce had little effect on grain growth. Ce delayed the grain coarsening temperature from 1050–1150 °C to 1150–1250 °C, resulting in grain refinement. The predicted results from the established dynamic model were consistent with the grain growth process, demonstrating high predictive accuracy. After Ce treatment, the activation energy for grain growth increased from 172.058 to 193.703 kJ/mol, representing a 12.58% rise, rendering grain growth more difficult. Within the holding temperature range, small spherical Nb-rich (Nb, Ti)(C, N) and large rectangular Ti-rich (Nb, Ti)(C, N) existed. The addition of 0.0070% Ce delayed the dissolution of Nb-rich carbonitrides. Finer precipitated phases and high-melting-point, fine Ce2O2S and CeAlO3 inclusions at grain boundaries provided greater pinning force, inhibiting grain growth.

Schlagwörter

Stichwörter der Autor:innen

Ce treatmentgrain growthhigh-strength low-alloy steelin situ observationpinning forceprecipitated phase

Autor:innen und Institutionen

  • State Key Laboratory of Advanced Metallurgy, University of Science and Technology Beijing, 30 Xueyuan Road, Haidian District, Beijing 100083, China.
  • Technical Center of Inner Mongolia Baotou Steel Union Co., Ltd., Baotou 014010, China.
  • Beijing Baotou Steel Technology Co., Ltd., Beijing 100083, China.

ORCID-Profile: Fei Huang, Bin Lu

Förderung

  • Central Government Guided Local Science and Technology Development Fund
  • The independent research and development project of State Key Laboratory of Advanced Metallurgy
  • independent research and development project of State Key Laboratory of Advanced Metallurgy

Zitieren

APA

Huang, F., Li, J., & Lu, B. (2026). Effect of Ce Treatment on the Austenite Grain Growth Behavior of High-Strength Low-Alloy Steel During Heating Process Before Rolling. Materials, 19(7), 1343. https://doi.org/10.3390/ma19071343

Vancouver

Huang F, Li J, Lu B. Effect of Ce Treatment on the Austenite Grain Growth Behavior of High-Strength Low-Alloy Steel During Heating Process Before Rolling. Materials. 2026;19(7):1343. doi:10.3390/ma19071343

BibTeX
@article{Huang2026,
  author = {Huang, Fei and Li, Jing and Lu, Bin},
  title = {Effect of Ce Treatment on the Austenite Grain Growth Behavior of High-Strength Low-Alloy Steel During Heating Process Before Rolling},
  journal = {Materials},
  year = {2026},
  volume = {19},
  number = {7},
  pages = {1343},
  doi = {10.3390/ma19071343}
}
Kostenlos starten →