EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Unveiling the Effects of Processing Parameters on Microstructure, Mechanical Properties, and Corrosion Resistance of High-Nb TiAl Alloy Fabricated by Laser Powder Bed Fusion

Gaoxi Wang, Ziwen Xie, Dongxu Zhang, Chenglong Ma iD

Materials · 27.03.2026 · 19 (7) · 1328

DOI: 10.3390/ma19071328 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Materials, online erschienen am 27.03.2026. Verfasst von Gaoxi Wang und 3 weiteren Autor:innen. Beteiligte Einrichtung: Ulster College, Shaanxi University of Science and Technology, Xi'an 710021, China. Die Arbeit wurde bisher 1-mal zitiert (Crossref) und nennt 42 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Postgraduate Research & Practice Innovation Program of Jiangsu Province.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

This study elucidates the impact of laser volumetric energy density (VED) on the densification behavior, microstructural evolution, wear resistance, and corrosion resistance of high-Nb TiAl alloys fabricated via laser powder bed fusion (LPBF). Experimental characterization results showed that relative density first increased and then decreased with increasing VED, reaching a maximum density of 97.13% at 66.67 J/mm3. Across the process windows, the high-Nb TiAl alloys were primarily composed of γ-TiAl, α2-Ti3Al, and β/B2 phases with varied proportions. Mechanical property analysis showed that the alloy attained a maximum average hardness of 422 HV0.5 at 81.48 J/mm3, due to the accumulation of harder α2 and B2 phases. However, the high-Nb TiAl alloys fabricated at 66.67 J/mm3 exhibited excellent wear resistance, as evidenced by wear track widths and depths of 971.71 μm and 21.83 μm, respectively. Abrasive and oxidative wear were identified as the primary mechanisms. Meanwhile, this specimen also exhibited excellent corrosion resistance, a corrosion current density of 1.421 × 10−6 A/cm2, attributed to the coupled dense passive film of TiO2 and Al2O3 that prevented chloride ingress. The findings in this work may provide a critical experimental reference and theoretical underpinnings for LPBF-fabricated lightweight structural materials.

Schlagwörter

Stichwörter der Autor:innen

corrosion resistancehigh-Nb TiAl alloylaser energy densitylaser powder bed fusionwear resistance

Autor:innen und Institutionen

  • Ulster College, Shaanxi University of Science and Technology, Xi'an 710021, China.
  • Jiangsu Key Laboratory of Advanced Food Manufacturing Equipment & Technology, School of Mechanical Engineering, Jiangnan University, Wuxi 214122, China.
  • College of Mechanical and Electrical Engineering, Shaanxi University of Science and Technology, Xi'an 710021, China.
  • Jiangsu Province Engineering Research Center of Micro-Nano Additive and Subtractive Manufacturing, Wuxi 214122, China.

ORCID-Profile: Chenglong Ma

Förderung

  • Postgraduate Research & Practice Innovation Program of Jiangsu Province

Zitieren

APA

Wang, G., Xie, Z., Zhang, D., & Ma, C. (2026). Unveiling the Effects of Processing Parameters on Microstructure, Mechanical Properties, and Corrosion Resistance of High-Nb TiAl Alloy Fabricated by Laser Powder Bed Fusion. Materials, 19(7), 1328. https://doi.org/10.3390/ma19071328

Vancouver

Wang G, Xie Z, Zhang D, Ma C. Unveiling the Effects of Processing Parameters on Microstructure, Mechanical Properties, and Corrosion Resistance of High-Nb TiAl Alloy Fabricated by Laser Powder Bed Fusion. Materials. 2026;19(7):1328. doi:10.3390/ma19071328

BibTeX
@article{Wang2026,
  author = {Wang, Gaoxi and Xie, Ziwen and Zhang, Dongxu and Ma, Chenglong},
  title = {Unveiling the Effects of Processing Parameters on Microstructure, Mechanical Properties, and Corrosion Resistance of High-Nb TiAl Alloy Fabricated by Laser Powder Bed Fusion},
  journal = {Materials},
  year = {2026},
  volume = {19},
  number = {7},
  pages = {1328},
  doi = {10.3390/ma19071328}
}
Kostenlos starten →