Industrial-Scale Copper Wear Reduction in the Electrical Discharge Machining Through Hydrostatic Extrusion
Materials · 26.03.2026 · 19 (7) · 1314
DOI: 10.3390/ma19071314 ↗Kurz gefasst
Fachartikel in der Zeitschrift Materials, online erschienen am 26.03.2026. Verfasst von Jacek Skiba und 5 weiteren Autor:innen. Beteiligte Einrichtung: Institute of High Pressure Physics, Polish Academy of Sciences (Unipress), Sokołowska 29, 01-142 Warsaw, Poland. Die Arbeit wurde bisher 2-mal zitiert (Crossref) und nennt 31 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Centre for Research and Development, National Centre for Research and Development https://ror.org/05pwfyy15, Institute of High Pressure Physics of the Polish Academy of Sciences.
Abstract (Originalsprache)
The study focused on the development and optimization of plastic deformation of pure M1E copper using an unconventional hydrostatic extrusion (HE) process aimed at improving the performance of electrodes used in electrical discharge machining (EDM). The process was designed to refine the microstructure while maintaining the high electrical conductivity required for EDM applications. Optimization of a three-stage HE process (cumulative strain ε = 2.51) resulted in the formation of an ultrafine-grained structure (d2 ≈ 370 nm), leading to a significant increase in mechanical strength (UTS ≈ 400 MPa) while preserving very high electrical conductivity (~99% IACS). This combination of properties is particularly important for EDM electrodes, as it allows improved wear resistance without compromising electrical performance. Due to the application-oriented nature of the study, the HE-processed copper was tested under industrial EDM conditions. Wear tests were conducted using seven electrodes of different geometries required for the production of a sample injection mold. The results demonstrated a substantial reduction in electroerosion wear of HE-processed electrodes (30–90%) compared with undeformed copper, together with up to 25% improvement in surface quality. These findings indicate that hydrostatic extrusion is an effective method for producing high performance EDM electrode materials with improved durability and machining quality.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- Institute of High Pressure Physics, Polish Academy of Sciences (Unipress), Sokołowska 29, 01-142 Warsaw, Poland.
- Gemet Elżbieta Czerwieniak, ul. Lisia 16, 05-410 Józefów, Poland.
ORCID-Profile: Jacek Skiba, Mariusz Kulczyk, Monika Skorupska
Förderung
- National Centre for Research and Development
- National Centre for Research and Development https://ror.org/05pwfyy15
- Institute of High Pressure Physics of the Polish Academy of Sciences
Zitieren
APA
Skiba, J., Kulczyk, M., Przybysz-Gloc, S., Skorupska, M., Kobus, M., & Nowak, K. (2026). Industrial-Scale Copper Wear Reduction in the Electrical Discharge Machining Through Hydrostatic Extrusion. Materials, 19(7), 1314. https://doi.org/10.3390/ma19071314
Vancouver
Skiba J, Kulczyk M, Przybysz-Gloc S, Skorupska M, Kobus M, Nowak K. Industrial-Scale Copper Wear Reduction in the Electrical Discharge Machining Through Hydrostatic Extrusion. Materials. 2026;19(7):1314. doi:10.3390/ma19071314
BibTeX
@article{Skiba2026,
author = {Skiba, Jacek and Kulczyk, Mariusz and Przybysz-Gloc, Sylwia and Skorupska, Monika and Kobus, Mariusz and Nowak, Kamil},
title = {Industrial-Scale Copper Wear Reduction in the Electrical Discharge Machining Through Hydrostatic Extrusion},
journal = {Materials},
year = {2026},
volume = {19},
number = {7},
pages = {1314},
doi = {10.3390/ma19071314}
}
EUVIMED