EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Decarburization Control of H13 Steel Under Varying Process Pressures During Austenitization

Gi-Hoon Kwon iD, Byoungho Choi, Su-Young Choi, Kyoung Jun An, Kyoung Il Moon

Materials · 23.03.2026 · 19 (6) · 1272

DOI: 10.3390/ma19061272 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Materials, online erschienen am 23.03.2026. Verfasst von Gi-Hoon Kwon und 4 weiteren Autor:innen. Beteiligte Einrichtung: Customized Manufacturing R&D Department (Siheung Technology Support Center), Korea Institute of Idustrial Technology, Siheung 15014, Republic of Kore…. Die Arbeit nennt 24 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Korea Institute of Industrial Technology, Ministry of SMEs and Startups.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Decarburization during austenitization degrades the surface integrity and mechanical performance of tool steels, yet the quantitative influence of process pressure remains unclear. In this study, the effect of process pressure on the decarburization behavior of H13 tool steel was investigated. Specimens were austenitized at 920–1020 °C for 60 min under pressures ranging from 0.01 to 760 Torr. Carbon concentration profiles were measured by electron probe microanalysis, and hardness degradation and mass loss were evaluated. A one-dimensional diffusion model with a Robin boundary condition was applied to describe the coupled effects of carbon diffusion and surface reaction. High-vacuum conditions suppressed decarburization, whereas increasing pressure accelerated carbon loss, leading to deeper decarburized layers and pronounced hardness reduction. The model reproduced the experimental results and revealed a pressure-dependent transition in the dominant decarburization mechanism.

Schlagwörter

Stichwörter der Autor:innen

biot numbercarbon diffusiondecarburizationrobin boundary condition

Autor:innen und Institutionen

  • Customized Manufacturing R&D Department (Siheung Technology Support Center), Korea Institute of Idustrial Technology, Siheung 15014, Republic of Korea.

ORCID-Profile: Gi-Hoon Kwon

Förderung

  • Korea Institute of Industrial Technology
  • Ministry of SMEs and Startups

Zitieren

APA

Kwon, G. H., Choi, B., Choi, S. Y., An, K. J., & Moon, K. I. (2026). Decarburization Control of H13 Steel Under Varying Process Pressures During Austenitization. Materials, 19(6), 1272. https://doi.org/10.3390/ma19061272

Vancouver

Kwon GH, Choi B, Choi SY, An KJ, Moon KI. Decarburization Control of H13 Steel Under Varying Process Pressures During Austenitization. Materials. 2026;19(6):1272. doi:10.3390/ma19061272

BibTeX
@article{Kwon2026,
  author = {Kwon, Gi-Hoon and Choi, Byoungho and Choi, Su-Young and An, Kyoung Jun and Moon, Kyoung Il},
  title = {Decarburization Control of H13 Steel Under Varying Process Pressures During Austenitization},
  journal = {Materials},
  year = {2026},
  volume = {19},
  number = {6},
  pages = {1272},
  doi = {10.3390/ma19061272}
}
Kostenlos starten →