EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Optical Properties and Growth of the (100) Crystal-Faced MAPbBr3 Film on TiN-Buffered MgO Substrate

Tzu-Lung Chang iD, Yu-Chen Lin, Yu-Li Hsieh, Hsueh-Hsing Hung, Hui-Huang Hsieh iD

Materials · 23.03.2026 · 19 (6) · 1265

DOI: 10.3390/ma19061265 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Materials, online erschienen am 23.03.2026. Verfasst von Tzu-Lung Chang und 4 weiteren Autor:innen. Beteiligte Einrichtung: School of Defense Science, Chung Cheng Institute of Technology, National Defense University, 75, Shiyuan Rd., Daxi Dist., Taoyuan 335009, Taiwan. Die Arbeit nennt 42 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Science and Technology Council, Taiwan.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The growth of MAPbBr3 crystal-faced films is a critical challenge for advancing optoelectronic devices. This study presents a methodology for fabricating a (100) crystal-faced MAPbBr3 film on a lattice-matched MgO/TiN composite substrate using a localized thermally driven inverse temperature crystallization technique. The metallic TiN buffer layer offers a 0.66% lattice mismatch to MAPbBr3, minimizing interfacial strain. Furthermore, the orientation enhancement of the film induced by post-annealing was confirmed by X-ray diffraction, with the (200) peak FWHM decreasing from 0.042° to 0.028° and the intensity ratio of the (100) to (110) peaks increasing from 6.89 to 19.00. These structural improvements directly translate into enhanced optical performance. The annealed sample exhibited sharper Raman phonon modes at 49 cm−1 and 151 cm−1, a 1.8-fold photoluminescence intensity enhancement, and a 20.8% narrowing of the PL FWHM at 536 nm. Additionally, UV-Vis spectroscopy confirms the bandgap of MAPbBr3, displaying a steeper absorption edge with a bandgap of 2.30 eV. These metrics provide compelling evidence of suppressed non-radiative recombination and improved optical homogeneity after annealing. By integrating TiN as an electron-transport and buffer layer to reduce strain and lattice mismatch, the MgO/TiN/MAPbBr3 architecture offers a scalable, scientifically grounded pathway to improve MAPbBr3’s optical performance.

Schlagwörter

Stichwörter der Autor:innen

MAPbBr3MgOTiNinverse temperature crystallization

Autor:innen und Institutionen

  • School of Defense Science, Chung Cheng Institute of Technology, National Defense University, 75, Shiyuan Rd., Daxi Dist., Taoyuan 335009, Taiwan.
  • Department of Electrical and Electronic Engineering, Chung Cheng Institute of Technology, National Defense University, 75, Shiyuan Rd., Daxi Dist., Taoyuan 335009, Taiwan.
  • Department of Physics, National Tsing Hua University, 101, Section 2, Kuang-Fu Road, Hsinchu 300013, Taiwan.

ORCID-Profile: Tzu-Lung Chang, Hui-Huang Hsieh

Förderung

  • National Science and Technology Council, Taiwan

Zitieren

APA

Chang, T. L., Lin, Y. C., Hsieh, Y. L., Hung, H. H., & Hsieh, H. H. (2026). Optical Properties and Growth of the (100) Crystal-Faced MAPbBr3 Film on TiN-Buffered MgO Substrate. Materials, 19(6), 1265. https://doi.org/10.3390/ma19061265

Vancouver

Chang TL, Lin YC, Hsieh YL, Hung HH, Hsieh HH. Optical Properties and Growth of the (100) Crystal-Faced MAPbBr3 Film on TiN-Buffered MgO Substrate. Materials. 2026;19(6):1265. doi:10.3390/ma19061265

BibTeX
@article{Chang2026,
  author = {Chang, Tzu-Lung and Lin, Yu-Chen and Hsieh, Yu-Li and Hung, Hsueh-Hsing and Hsieh, Hui-Huang},
  title = {Optical Properties and Growth of the (100) Crystal-Faced MAPbBr3 Film on TiN-Buffered MgO Substrate},
  journal = {Materials},
  year = {2026},
  volume = {19},
  number = {6},
  pages = {1265},
  doi = {10.3390/ma19061265}
}
Kostenlos starten →