EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Elastic Die Technology for Spur Gear Powder Compaction: Experimental Measurements and Simulation-Based Validation

Dan Cristian Noveanu iD

Materials · 19.03.2026 · 19 (6) · 1203

DOI: 10.3390/ma19061203 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Materials, online erschienen am 19.03.2026. Verfasst von Dan Cristian Noveanu. Beteiligte Einrichtung: Materials Science and Engineering Department, Technical University of Cluj-Napoca, 103-105 Muncii Avenue, 400641 Cluj-Napoca, Romania. Die Arbeit wurde bisher 1-mal zitiert (Crossref) und nennt 26 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Achieving high density in complex powder metallurgy components like spur gears is often hindered by friction-induced density gradients and ejection defects. This study investigates a novel elastic die system designed to mitigate these issues through controlled radial deformation. Spur gears were compacted using Ancorsteel 2000 powder under pressures of 400–700 MPa, utilizing a tapered elastic sleeve to apply radial compression. Green and sintered densities were measured, while porosity distribution was quantified via image analysis. Additionally, a 3D finite element simulation using FORGE software was conducted to model the thermo-mechanical behavior and stress distribution during the process. Experimental trials demonstrated that the elastic relaxation of the sleeve enabled free ejection of the compacts without requiring an extraction force. Image analysis confirmed a homogenous porosity distribution across the gear teeth, and higher die pre-stressing strokes were found to correlate with increased sintered density. Finite element modeling accurately predicted critical stress concentrations of 700 MPa at the die–sleeve interface and validated the strain distribution. The results confirm that elastic die technology effectively eliminates ejection friction and improves density uniformity in complex gears, offering a viable solution for reducing tool wear and manufacturing defects in high-precision powder metallurgy.

Schlagwörter

Stichwörter der Autor:innen

elastic diefinite element analysismetal powder compaction

Autor:innen und Institutionen

  • Materials Science and Engineering Department, Technical University of Cluj-Napoca, 103-105 Muncii Avenue, 400641 Cluj-Napoca, Romania.
  • EUT+ European University of Technology, European Union.

ORCID-Profile: Dan Cristian Noveanu

Zitieren

APA

Noveanu, D. C. (2026). Elastic Die Technology for Spur Gear Powder Compaction: Experimental Measurements and Simulation-Based Validation. Materials, 19(6), 1203. https://doi.org/10.3390/ma19061203

Vancouver

Noveanu DC. Elastic Die Technology for Spur Gear Powder Compaction: Experimental Measurements and Simulation-Based Validation. Materials. 2026;19(6):1203. doi:10.3390/ma19061203

BibTeX
@article{Noveanu2026,
  author = {Noveanu, Dan Cristian},
  title = {Elastic Die Technology for Spur Gear Powder Compaction: Experimental Measurements and Simulation-Based Validation},
  journal = {Materials},
  year = {2026},
  volume = {19},
  number = {6},
  pages = {1203},
  doi = {10.3390/ma19061203}
}
Kostenlos starten →