Effect of Contact Conditions on Frictional Characteristics of Low-Carbon Deep-Drawn Steel Sheets
Materials · 18.03.2026 · 19 (6) · 1199
DOI: 10.3390/ma19061199 ↗Kurz gefasst
Fachartikel in der Zeitschrift Materials, online erschienen am 18.03.2026. Verfasst von Tomasz Trzepieciński und 3 weiteren Autor:innen. Beteiligte Einrichtung: Faculty of Mechanical Engineering and Aeronautics, Rzeszów University of Technology, al. Powstańców Warszawy 8, 35-029 Rzeszów, Poland. Die Arbeit nennt 54 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).
Abstract (Originalsprache)
Friction in sheet metal forming processes is a key factor determining the material flow behavior and surface quality of products. Controlling friction conditions is crucial for ensuring the stability of the forming process. This article focuses on evaluating the influence of strip sample orientation, tool surface roughness, and contact forces on the coefficient of friction in the strip drawing test. Low-carbon, deep-drawing-quality steel sheets produced by rolling were used as the test material. Due to the complex influence of numerous parameters on the coefficient of friction, analysis of variance (ANOVA) was employed to evaluate the experimental results. A two-factor interaction model was used to analyze the data from the strip drawing test. An adequate precision of approximately 104.74 and coefficients of determination of R2 = 0.9367, an adjusted R2 = 0.9350, and a predicted R2 = 0.9331 indicated that the regression model was sufficiently fitted to provide reliable predictions. It was found that the influence of sheet orientation on the coefficient of friction, under a varying load force, was minor; the difference in the CoF between the two sample orientations did not exceed about 0.01. On the other hand, among all the parameters of the strip drawing test, the load force was the decisive factor affecting the CoF. A trend was observed in which the coefficient of friction increased with a decreasing average roughness of the countersamples and load force.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- Faculty of Mechanical Engineering and Aeronautics, Rzeszów University of Technology, al. Powstańców Warszawy 8, 35-029 Rzeszów, Poland.
- Department of Fuel and Energy Engineering Techniques, College of Oil & Gas Techniques Engineering-Kirkuk, Northern Technical University, Kirkuk 36001, Iraq.
- Faculty of Engineering, "Lucian Blaga" University of Sibiu, Victoriei Bd. 10, 550024 Sibiu, Romania.
ORCID-Profile: Tomasz Trzepieciński, Sherwan Mohammed Najm, Valentin Oleksik, Mihaela Oleksik
Zitieren
APA
Trzepieciński, T., Najm, S. M., Oleksik, V., & Oleksik, M. (2026). Effect of Contact Conditions on Frictional Characteristics of Low-Carbon Deep-Drawn Steel Sheets. Materials, 19(6), 1199. https://doi.org/10.3390/ma19061199
Vancouver
Trzepieciński T, Najm SM, Oleksik V, Oleksik M. Effect of Contact Conditions on Frictional Characteristics of Low-Carbon Deep-Drawn Steel Sheets. Materials. 2026;19(6):1199. doi:10.3390/ma19061199
BibTeX
@article{Trzepieciski2026,
author = {Trzepieciński, Tomasz and Najm, Sherwan Mohammed and Oleksik, Valentin and Oleksik, Mihaela},
title = {Effect of Contact Conditions on Frictional Characteristics of Low-Carbon Deep-Drawn Steel Sheets},
journal = {Materials},
year = {2026},
volume = {19},
number = {6},
pages = {1199},
doi = {10.3390/ma19061199}
}
EUVIMED