EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Influence of Boron on the Microstructural Evolution, Impact and Creep Properties Stability of IN718 Superalloy During Long-Term Aging

Zhiyuan Wang, Yingjie Liu, Ning An, Jia Man, Xin Xin, Jianyong Li iD, Maocheng Ji, Wenru Sun

Materials · 16.03.2026 · 19 (6) · 1152

DOI: 10.3390/ma19061152 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Materials, online erschienen am 16.03.2026. Verfasst von Zhiyuan Wang und 7 weiteren Autor:innen. Beteiligte Einrichtung: Key Laboratory of High Efficiency and Clean Mechanical Manufacture, Ministry of Education, School of Mechanical Engineering, Shandong University, Jin…. Die Arbeit wurde bisher 1-mal zitiert (Crossref) und nennt 49 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The impact of boron (B) on the microstructure evolution and stabilization of mechanical properties in the IN718 superalloy during aging at 680 °C for 3000 h is investigated. The results indicated that B had negligible effects on grain size and the intragranular γ″ phase growth. In contrast, it effectively suppressed the precipitation and growth of the δ phase during long-term aging, which is attributed to grain boundary segregation of B that retards the diffusion of alloying elements. Adding B could improve the impact toughness and stability of the creep properties of the alloy. The primary mechanism is that the addition of B enhances grain boundary cohesion and suppresses the coarsening of the δ phase, while the beneficial effect of B on mechanical stability becomes negligible during the later stages of aging, as the severe coarsening of grain boundary phases offsets the enhanced grain boundary cohesion resulting from B segregation. Furthermore, the presence of slip bands was observed in the creep deformation mechanism of B-added alloys, which is likely attributable to B promoting dislocation slip at grain boundaries. With prolonged aging time, the dominant creep deformation mechanism in the B-modified alloy shifts from being primarily governed by twinning and dislocation slip to a mechanism involving twinning, stacking fault shearing γ″ phase, and dislocation slip.

Schlagwörter

Stichwörter der Autor:innen

IN718 superalloyboronlong-term agingmechanical propertiesmicrostructure stability

Autor:innen und Institutionen

  • Key Laboratory of High Efficiency and Clean Mechanical Manufacture, Ministry of Education, School of Mechanical Engineering, Shandong University, Jinan 250061, China.
  • Institute of Metal Research, Chinese Academy of Sciences, Shenyang 110016, China.
  • Beijing Beiye Advanced Materials Co., Ltd., Beijing 100192, China.

ORCID-Profile: Jianyong Li

Zitieren

APA

Wang, Z., Liu, Y., An, N., Man, J., Xin, X., Li, J., Ji, M., & Sun, W. (2026). Influence of Boron on the Microstructural Evolution, Impact and Creep Properties Stability of IN718 Superalloy During Long-Term Aging. Materials, 19(6), 1152. https://doi.org/10.3390/ma19061152

Vancouver

Wang Z, Liu Y, An N, Man J, Xin X, Li J, et al. Influence of Boron on the Microstructural Evolution, Impact and Creep Properties Stability of IN718 Superalloy During Long-Term Aging. Materials. 2026;19(6):1152. doi:10.3390/ma19061152

BibTeX
@article{Wang2026,
  author = {Wang, Zhiyuan and Liu, Yingjie and An, Ning and Man, Jia and Xin, Xin and Li, Jianyong and Ji, Maocheng and Sun, Wenru},
  title = {Influence of Boron on the Microstructural Evolution, Impact and Creep Properties Stability of IN718 Superalloy During Long-Term Aging},
  journal = {Materials},
  year = {2026},
  volume = {19},
  number = {6},
  pages = {1152},
  doi = {10.3390/ma19061152}
}
Kostenlos starten →