Love Wave Propagation in a Piezoelectric Composite Structure with an Inhomogeneous Internal Layer
Materials · 16.03.2026 · 19 (6) · 1151
DOI: 10.3390/ma19061151 ↗Kurz gefasst
Fachartikel in der Zeitschrift Materials, online erschienen am 16.03.2026. Verfasst von Yanqi Zhao und 3 weiteren Autor:innen. Beteiligte Einrichtung: School of Mechanical Engineering, Hangzhou Dianzi University, Hangzhou 310018, China. Die Arbeit wurde bisher 1-mal zitiert (Crossref) und nennt 48 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Natural Science Foundation of China, key task project for joint research and development of the Yangtze River Delta Science and Technology Innovation Community, State Key Laboratory of Mechanics and Control for Aerospace Structures.
Abstract (Originalsprache)
An inhomogeneous thin internal stratum sometimes exists between two dissimilar materials, which is usually caused by non-uniform thermal distribution, interaction of different media, diffusion impurity or material degeneration and damage. In this paper, it is considered as a functional graded (FG) piezoelectric material in surface acoustic wave devices, and we investigate its effect on Love wave propagation within the framework of the linear piezoelectric theory. Correspondingly, the power series technique is presented and applied to solve the dynamic governing equations, i.e., two-dimensional partial differential equations with variable coefficients, with the convergence and correctness being proved. In this method, the material coefficients can change in random functions along the thickness direction, which reveals the generality of this method to some extent. As the numerical case, the elastic coefficient, piezoelectric coefficient, dielectric permittivity, and mass density change in the linear form but with different graded parameters, and the influence of material inhomogeneity on the Love wave propagation is systematically investigated, including the phase velocity, electromechanical coupling factor, and displacement distribution. In addition, the FG piezoelectric material caused by piezoelectric damage and material bonding is discussed. Numerical results demonstrated that both piezoelectric damaged and material bonding can make the higher modes appear earlier for the electrically open case, decrease the initial phase velocity, and limit the existing region of the fundamental Love mode for the electrically shorted case. The qualitative conclusions and quantitative results can provide a theoretical guide for the structural design of surface wave devices and sensors.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- School of Mechanical Engineering, Hangzhou Dianzi University, Hangzhou 310018, China.
- State Key Laboratory of Mechanics and Control for Aerospace Structures, College of Aerospace Engineering, Nanjing University of Aeronautics and Astronautics, Nanjing 210016, China.
ORCID-Profile: Peng Li, Guochao Fan, Chun Shao
Förderung
- National Natural Science Foundation of China
- key task project for joint research and development of the Yangtze River Delta Science and Technology Innovation Community
- State Key Laboratory of Mechanics and Control for Aerospace Structures
Zitieren
APA
Zhao, Y., Li, P., Fan, G., & Shao, C. (2026). Love Wave Propagation in a Piezoelectric Composite Structure with an Inhomogeneous Internal Layer. Materials, 19(6), 1151. https://doi.org/10.3390/ma19061151
Vancouver
Zhao Y, Li P, Fan G, Shao C. Love Wave Propagation in a Piezoelectric Composite Structure with an Inhomogeneous Internal Layer. Materials. 2026;19(6):1151. doi:10.3390/ma19061151
BibTeX
@article{Zhao2026,
author = {Zhao, Yanqi and Li, Peng and Fan, Guochao and Shao, Chun},
title = {Love Wave Propagation in a Piezoelectric Composite Structure with an Inhomogeneous Internal Layer},
journal = {Materials},
year = {2026},
volume = {19},
number = {6},
pages = {1151},
doi = {10.3390/ma19061151}
}
EUVIMED