EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Repair Bond Strength of Ion-Releasing Versus Conventional Resin Composites

Jenny Buhl iD, Matej Par iD, Andrea Gubler iD, Tobias T Tauböck

Materials · 11.03.2026 · 19 (6) · 1076

DOI: 10.3390/ma19061076 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Materials, online erschienen am 11.03.2026. Verfasst von Jenny Buhl und 3 weiteren Autor:innen. Beteiligte Einrichtung: Department of Conservative and Preventive Dentistry, Center for Dental Medicine, University of Zurich, 8032 Zurich, Switzerland. Die Arbeit nennt 51 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

With the growing clinical use of ion-releasing resin composites, their repairability has become an important consideration in minimally invasive restorative dentistry. Therefore, this study investigated the repair bond strength of a universal composite restorative to commercially available and experimental ion-releasing resin composite materials. Specimens (n = 8 per group) were produced from three commercially available ion-releasing composite materials (ACTIVA BioACTIVE-RESTORATIVE, Cention Forte, Beautifil II), one experimental ion-releasing resin composite containing 20 wt% bioactive glass fillers, and two conventional resin composites (3M Filtek Supreme XTE, Ceram.x Spectra ST), and aged by thermal cycling in artificial saliva (5000 cycles, 5–55 °C). Substrate surfaces were sandblasted (Al2O3, 50 µm), silanized (Monobond Plus), and repaired using adhesive (OptiBond FL) and universal resin composite (Ceram.x Spectra ST). After further thermal cycling, micro-tensile repair bond strength was assessed and analyzed using one-way ANOVA followed by Tukey’s post hoc test. Failure modes were determined by stereomicroscopy (25× magnification) and statistically compared among the groups. Highest mean repair bond strength values were obtained for ACTIVA BioACTIVE-RESTORATIVE, Beautifil II, and 3M Filtek Supreme XTE (53.8, 46.2, and 43.0 MPa, respectively), which did not differ significantly among each other. ACTIVA BioACTIVE-RESTORATIVE attained significantly higher bond strength than the experimental composite, Ceram.x Spectra ST, and Cention Forte, and showed the highest incidence of cohesive failures (40%). No significant bond strength differences were detected among Beautifil II, 3M Filtek Supreme XTE, experimental composite, Ceram.x Spectra ST, and Cention Forte (36.2–46.2 MPa). In conclusion, ion-releasing resin composites can be repaired with conventional universal composite and show repair bond strength values at least as high as those of conventional composite materials.

Schlagwörter

Stichwörter der Autor:innen

bioactive glass fillerfailure analysision-releasing resin compositemicro-tensile bond strengthrepair bond strengthresin composite

Autor:innen und Institutionen

  • Department of Conservative and Preventive Dentistry, Center for Dental Medicine, University of Zurich, 8032 Zurich, Switzerland.
  • Department of Endodontics and Restorative Dentistry, University of Zagreb School of Dental Medicine, 10000 Zagreb, Croatia.

ORCID-Profile: Jenny Buhl, Matej Par, Andrea Gubler

Zitieren

APA

Buhl, J., Par, M., Gubler, A., & Tauböck, T. T. (2026). Repair Bond Strength of Ion-Releasing Versus Conventional Resin Composites. Materials, 19(6), 1076. https://doi.org/10.3390/ma19061076

Vancouver

Buhl J, Par M, Gubler A, Tauböck TT. Repair Bond Strength of Ion-Releasing Versus Conventional Resin Composites. Materials. 2026;19(6):1076. doi:10.3390/ma19061076

BibTeX
@article{Buhl2026,
  author = {Buhl, Jenny and Par, Matej and Gubler, Andrea and Tauböck, Tobias T},
  title = {Repair Bond Strength of Ion-Releasing Versus Conventional Resin Composites},
  journal = {Materials},
  year = {2026},
  volume = {19},
  number = {6},
  pages = {1076},
  doi = {10.3390/ma19061076}
}
Kostenlos starten →