EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Quantitative Analysis of the Shape Characteristics for Quartz Particles

Wenqing Jiang, Zhenggang Jia, Yanchang Jiang, Wenjie Yuan iD

Materials · 11.03.2026 · 19 (6) · 1068

DOI: 10.3390/ma19061068 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Materials, online erschienen am 11.03.2026. Verfasst von Wenqing Jiang und 3 weiteren Autor:innen. Beteiligte Einrichtung: State Key Laboratory of Advanced Refractories, Wuhan University of Science and Technology, Wuhan 430081, China. Die Arbeit wurde bisher 1-mal zitiert (Crossref) und nennt 28 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Hubei Province Science and Technology Innovation Talent Plan, and Science and Technology Service Talent Special Project, Hubei Province Science and Technology Innovation Talent Plan, and Science and Technology Talent Service Enterprise Special Project.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Quartz, as an important non-metallic mineral, is widely used in many industrial fields. The shape characteristics of quartz particles are key factors affecting the bulk density, construction performance, and high-temperature performance of dry ramming mixes. This study focuses on quartz with seven different particle sizes from four different origins. Using digital image processing technology, geometric parameters such as flatness, circularity, and angularity of the particles (with a count equal to or exceeding 300 for each particle size category) were quantitatively analyzed, and the fractal dimension of quartz particles was calculated based on fractal theory. The results show that quartz from Luoyang exhibits the highest flatness, and quartz particles from Fengyang present the highest circularity, while the flatness and angularity of quartz particles from Xiangyang and Chengde are similar. The fractal dimensions of 20–100 mesh quartz particles from Fengyang are in the range of 1.027 to 1.060, greater than those of the other quartz particles. At smaller particle sizes, the shape of quartz from various origins tends to be regular (the circularity of particles of 70–100 mesh is >0.8). Through the quantitative characterization of parameters, the relationship between particle shape and size was revealed, which provided an important basis for selecting the raw materials and performing quality control for silica-based dry ramming mixes.

Schlagwörter

Stichwörter der Autor:innen

fractal dimensionparticle shape characteristicsquantitative analysisquartz

Autor:innen und Institutionen

  • State Key Laboratory of Advanced Refractories, Wuhan University of Science and Technology, Wuhan 430081, China.
  • Hubei Annaijie Lining Materials Co., Ltd., Xiangyang 441100, China.
  • National-Provincial Joint Engineering Research Center of High Temperature Materials and Lining Technology, Wuhan University of Science and Technology, Wuhan 430081, China.
  • Joint International Research Laboratory of Refractories and Metallurgy, Wuhan University of Science and Technology, Wuhan 430081, China.

ORCID-Profile: Wenjie Yuan

Förderung

  • Hubei Province Science and Technology Innovation Talent Plan, and Science and Technology Service Talent Special Project
  • Hubei Province Science and Technology Innovation Talent Plan, and Science and Technology Talent Service Enterprise Special Project

Zitieren

APA

Jiang, W., Jia, Z., Jiang, Y., & Yuan, W. (2026). Quantitative Analysis of the Shape Characteristics for Quartz Particles. Materials, 19(6), 1068. https://doi.org/10.3390/ma19061068

Vancouver

Jiang W, Jia Z, Jiang Y, Yuan W. Quantitative Analysis of the Shape Characteristics for Quartz Particles. Materials. 2026;19(6):1068. doi:10.3390/ma19061068

BibTeX
@article{Jiang2026,
  author = {Jiang, Wenqing and Jia, Zhenggang and Jiang, Yanchang and Yuan, Wenjie},
  title = {Quantitative Analysis of the Shape Characteristics for Quartz Particles},
  journal = {Materials},
  year = {2026},
  volume = {19},
  number = {6},
  pages = {1068},
  doi = {10.3390/ma19061068}
}
Kostenlos starten →