Response Surface Optimization of High-Durability Fly Ash–Slag Blended Concrete as an Eco-Friendly Repair Material
Materials · 10.03.2026 · 19 (6) · 1058
DOI: 10.3390/ma19061058 ↗Kurz gefasst
Fachartikel in der Zeitschrift Materials, online erschienen am 10.03.2026. Verfasst von Hua Wei und 4 weiteren Autor:innen. Beteiligte Einrichtung: Materials & Structural Engineering Department, Nanjing Hydraulic Research Institutes, Nanjing 210029, China. Die Arbeit wurde bisher 1-mal zitiert (Crossref) und nennt 34 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Natural Science Foundation of China, the Fundamental Research Funds for Basic Research of Public Welfare Scientific Research Institutes, Fundamental Research Funds for Basic Research of Public Welfare Scientific Research Institutes.
Abstract (Originalsprache)
To address the durability deficiencies and limited service life of concrete structures exposed to complex service environments such as chloride attack in marine and underground engineering, this study employs fly ash (FA) and ground granulated blast-furnace slag (GGBS), typical eco-friendly materials, as functional mineral admixtures to systematically investigate the effects of their combined incorporation on the mechanical properties, durability, drying shrinkage, and microstructural characteristics of concrete. The objective is to develop a concrete material that achieves high durability while maintaining structural safety and service performance, with the additional benefit of improved resource utilization efficiency. Single-factor tests were first conducted to determine the sensitivity ranges of FA and GGBS within 10–30% for slump, compressive strength, chloride migration coefficient (RCM), and drying shrinkage. Subsequently, response surface methodology (RSM) was employed to establish quadratic regression models using FA and GGBS as independent variables and compressive strength, RCM, and drying shrinkage as response indicators. The models exhibited high fitting accuracy, and their reliability was validated through analysis of variance (ANOVA), residual analysis, and predictive performance indices. Multi-objective optimization based on the desirability function identified the optimal mix proportion as FA = 14.8% and SL = 29.3%, yielding predicted values of 56.2 MPa for 28-day compressive strength, 6.03 × 10−12 m2/s for RCM, and 639 με for 90-day drying shrinkage. Microstructural analysis using SEM and MIP further revealed that the binary-blended system promotes the formation of a dense C–S–H/C–A–S–H gel network, refines pore-size distribution, and reduces pore connectivity, thereby improving long-term mechanical and durability performance. The findings provide quantitative guidance for designing high-durability, environmentally friendly concrete suitable for marine and underground engineering applications.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- Materials & Structural Engineering Department, Nanjing Hydraulic Research Institutes, Nanjing 210029, China.
- Department of Civil and Environment Engineering, University of Miyazaki, Miyazaki 889-2192, Japan.
- College of Water Conservancy and Hydropower Engineering, Hohai University, Nanjing 210098, China.
Förderung
- National Natural Science Foundation of China
- the Fundamental Research Funds for Basic Research of Public Welfare Scientific Research Institutes
- Fundamental Research Funds for Basic Research of Public Welfare Scientific Research Institutes
Zitieren
APA
Wei, H., Chen, A., Li, C., Zhang, J., & Lu, H. (2026). Response Surface Optimization of High-Durability Fly Ash–Slag Blended Concrete as an Eco-Friendly Repair Material. Materials, 19(6), 1058. https://doi.org/10.3390/ma19061058
Vancouver
Wei H, Chen A, Li C, Zhang J, Lu H. Response Surface Optimization of High-Durability Fly Ash–Slag Blended Concrete as an Eco-Friendly Repair Material. Materials. 2026;19(6):1058. doi:10.3390/ma19061058
BibTeX
@article{Wei2026,
author = {Wei, Hua and Chen, Anyi and Li, Chunhe and Zhang, Jiaming and Lu, Hao},
title = {Response Surface Optimization of High-Durability Fly Ash–Slag Blended Concrete as an Eco-Friendly Repair Material},
journal = {Materials},
year = {2026},
volume = {19},
number = {6},
pages = {1058},
doi = {10.3390/ma19061058}
}
EUVIMED