EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Effects of Cold Rolling on the Microstructure and Properties of Al/TiB2 Laminated Composites Fabricated by Accumulative Roll Bonding

Wenchao Sun, Zhilei Xiang, Jihao Li, Zian Yang, Yang Han, Ziyong Chen iD

Materials · 08.03.2026 · 19 (5) · 1031

DOI: 10.3390/ma19051031 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Materials, online erschienen am 08.03.2026. Verfasst von Wenchao Sun und 5 weiteren Autor:innen. Beteiligte Einrichtung: College of Materials Science and Engineering, Beijing University of Technology, Beijing 100124, China. Die Arbeit nennt 35 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Al/TiB2 aluminum alloy laminates were fabricated using a combination of accumulative roll bonding (ARB) and cold rolling processes. The Al/TiB2 interface and microstructure were meticulously characterized by scanning electron microscopy (SEM) and transmission electron microscopy (TEM). The mechanical properties of the laminates were assessed through tensile testing. The experimental results demonstrate that with an increasing cold rolling reduction, a laminated composite sheet with a nanocrystalline structure was successfully produced. The critical strain for the onset of plastic instability was also investigated. The findings indicate that as the cold rolling reduction increases, severe necking occurs in the Al12Zn2.2Mg1.7Cu3TiB2 layer. At a reduction of 80%, the necking region approaches fracture. Tensile results reveal that this pronounced necking has a detrimental effect on the strength of the laminate. It is proposed that the plastic instability originates from shear bands, and the mechanical property mismatch between the constituent layers is identified as the primary reason for the localized preferential deformation.

Schlagwörter

Stichwörter der Autor:innen

accumulative roll bondinglaminated platesmechanical propertiesnecking

Autor:innen und Institutionen

  • College of Materials Science and Engineering, Beijing University of Technology, Beijing 100124, China.

ORCID-Profile: Ziyong Chen

Zitieren

APA

Sun, W., Xiang, Z., Li, J., Yang, Z., Han, Y., & Chen, Z. (2026). Effects of Cold Rolling on the Microstructure and Properties of Al/TiB2 Laminated Composites Fabricated by Accumulative Roll Bonding. Materials, 19(5), 1031. https://doi.org/10.3390/ma19051031

Vancouver

Sun W, Xiang Z, Li J, Yang Z, Han Y, Chen Z. Effects of Cold Rolling on the Microstructure and Properties of Al/TiB2 Laminated Composites Fabricated by Accumulative Roll Bonding. Materials. 2026;19(5):1031. doi:10.3390/ma19051031

BibTeX
@article{Sun2026,
  author = {Sun, Wenchao and Xiang, Zhilei and Li, Jihao and Yang, Zian and Han, Yang and Chen, Ziyong},
  title = {Effects of Cold Rolling on the Microstructure and Properties of Al/TiB2 Laminated Composites Fabricated by Accumulative Roll Bonding},
  journal = {Materials},
  year = {2026},
  volume = {19},
  number = {5},
  pages = {1031},
  doi = {10.3390/ma19051031}
}
Kostenlos starten →