EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Effect of Transformation Plasticity on the Residual Stress of Laser–MAG Hybrid Welding of 30MnCrNiMo High-Strength Steel

Haotian Sun, Yongquan Han, Ruiqing Lang, Boyu Song, Zhenbang Sun, Xulei Bao

Materials · 06.03.2026 · 19 (5) · 1022

DOI: 10.3390/ma19051022 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Materials, online erschienen am 06.03.2026. Verfasst von Haotian Sun und 5 weiteren Autor:innen. Beteiligte Einrichtung: School of Materials Science and Engineering, Inner Mongolia University of Technology, Hohhot 010051, China. Die Arbeit nennt 36 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Natural Science Foundation of China, Inner Mongolia Autonomous Region Natural Science Foundation Project, large platform construction project of key technology integration of new non-ferrous metal material development and processing forming.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

In the current numerical simulation study of high-strength steel welding, ignoring the phase transformation plasticity effect in the coupling analysis led to a significant deviation between the simulated value of residual stress and the experimentally measured value. To investigate the influence mechanism of the Welding Residual Stresses (WRSs) of 30MnCrNiMo armor steel, the transformation plasticity (TP) coefficient (7.81 × 10−5 MPa−1) was measured via a Gleeble 3500, and a Finite Element Model (FEM) of thermal–metallurgical–mechanical coupling considering yield strength, volumetric strain and TP behavior in Solid-State Phase Transformation (SSPT) was developed. The results show that the volume expansion during the SSPT is the main factor for the shift in WRS from tensile to compressive. In contrast, the TP effect reduces the peak longitudinal tensile stress in the Heat-Affected Zone (HAZ) by 51 MPa. It also ultimately neutralizes the compressive component in this region. When the martensite fraction ranges from 0.12 to 0.45, transformation plastic strain becomes the dominant factor, leading to a characteristic evolution of longitudinal stress that initially decreases and subsequently increases. The FEM incorporating the TP effect successfully captures the dual reversals of residual stress in the HAZ. The average relative error between the simulated longitudinal stress and the experimental data obtained via X-ray diffraction (cosα method) is 8.8%. The TP coefficient database and the developed multi-field coupling model markedly enhance the predictive accuracy for WRS in 30MnCrNiMo steel, offering a robust theoretical foundation for the design of stress corrosion resistance and the service life assessment of welded joints in armored vehicles.

Schlagwörter

Stichwörter der Autor:innen

30MnCrNiMosolid-state phase transformationthermal–metallurgical–mechanicaltransformation plasticityweld residual stress

Autor:innen und Institutionen

  • School of Materials Science and Engineering, Inner Mongolia University of Technology, Hohhot 010051, China.
  • Engineering Research Center of Development and Processing Protection of Advanced Light Metals, Ministry of Education, Hohhot 010051, China.
  • School of Materials Science and Engineering, Inner Mongolia University of Science & Technology, Baotou 014017, China.

Förderung

  • National Natural Science Foundation of China
  • Inner Mongolia Autonomous Region Natural Science Foundation Project
  • large platform construction project of key technology integration of new non-ferrous metal material development and processing forming
  • basic scientific research business fee project of universities directly under the autonomous region
  • key scientific research project of civil-military integration in Inner Mongolia Autonomous Region
  • first-class discipline scientific research special project

Zitieren

APA

Sun, H., Han, Y., Lang, R., Song, B., Sun, Z., & Bao, X. (2026). Effect of Transformation Plasticity on the Residual Stress of Laser–MAG Hybrid Welding of 30MnCrNiMo High-Strength Steel. Materials, 19(5), 1022. https://doi.org/10.3390/ma19051022

Vancouver

Sun H, Han Y, Lang R, Song B, Sun Z, Bao X. Effect of Transformation Plasticity on the Residual Stress of Laser–MAG Hybrid Welding of 30MnCrNiMo High-Strength Steel. Materials. 2026;19(5):1022. doi:10.3390/ma19051022

BibTeX
@article{Sun2026,
  author = {Sun, Haotian and Han, Yongquan and Lang, Ruiqing and Song, Boyu and Sun, Zhenbang and Bao, Xulei},
  title = {Effect of Transformation Plasticity on the Residual Stress of Laser–MAG Hybrid Welding of 30MnCrNiMo High-Strength Steel},
  journal = {Materials},
  year = {2026},
  volume = {19},
  number = {5},
  pages = {1022},
  doi = {10.3390/ma19051022}
}
Kostenlos starten →