EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Analysis of Factors Influencing the Bonding Performance at the FFRP-Timber Interface

Yuanyuan Xia, Weilong Zhang, Jianbo Tian, Yangyang Xia iD

Materials · 04.03.2026 · 19 (5) · 991

DOI: 10.3390/ma19050991 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Materials, online erschienen am 04.03.2026. Verfasst von Yuanyuan Xia und 3 weiteren Autor:innen. Beteiligte Einrichtung: School of Civil Engineering and Architecture, Xi'an University of Technology, Xi'an 710048, China. Die Arbeit wurde bisher 1-mal zitiert (Crossref) und nennt 34 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Natural Science Basic Research Program in Shaanxi Province of China, Major Science and Technology Special Project of the Science and Technology Plan of the Tibet Autonomous Region.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Flax Fiber Reinforced Polymer (FFRP), as a green material with nonlinear large deformation characteristics, is used in the reinforcement of timber structures. Due to the similar elastic moduli of FFRP, adhesive, and timber, stress concentration at the interface is significantly reduced, demonstrating favorable interfacial performance. This study investigates the effects of adhesive layer thickness and FFRP laminate thickness on the strain distribution, bond-slip relationship, and stress distribution at the FFRP-timber interface through two different types of single-lap shear tests, thereby revealing the bonding mechanism at the FFRP-timber interface. The results show that both the ultimate load and the ultimate strain at the loaded end decrease with increasing adhesive thickness. For instance, increasing the adhesive thickness from 0.5 mm to 3 mm led to a 68.6% reduction in peak interfacial shear stress. The thickness of the adhesive has a minor influence on the overall trend of the bond-slip relationship curve for the FFRP-timber interface, with the curve consisting of an ascending branch, a descending branch, and a horizontal plateau. The distribution patterns of interfacial shear stress for different adhesive layer thicknesses are similar: at the initial loading stage, the maximum shear stress appears at the loaded end and gradually decreases toward the free end; as the load increases, the peak shear stress shifts from the loaded end toward the free end. With an increase in the number of fiber layers in the FFRP laminate, the strain transfer efficiency first increases and then decreases, reaching its maximum when the number of fiber layers reaches 30. The maximum stress increases with the number of FFRP fiber layers, and the stress transfer efficiency peaks at 30 layers.

Schlagwörter

Stichwörter der Autor:innen

bond-slip relationshipflax fiber reinforced polymerinterfacial stress and strain distributionultimate bearing capacity

Autor:innen und Institutionen

  • School of Civil Engineering and Architecture, Xi'an University of Technology, Xi'an 710048, China.
  • School of Engineering, Tibet University, Lhasa 850000, China.

ORCID-Profile: Yangyang Xia

Förderung

  • Natural Science Basic Research Program in Shaanxi Province of China
  • Major Science and Technology Special Project of the Science and Technology Plan of the Tibet Autonomous Region

Zitieren

APA

Xia, Y., Zhang, W., Tian, J., & Xia, Y. (2026). Analysis of Factors Influencing the Bonding Performance at the FFRP-Timber Interface. Materials, 19(5), 991. https://doi.org/10.3390/ma19050991

Vancouver

Xia Y, Zhang W, Tian J, Xia Y. Analysis of Factors Influencing the Bonding Performance at the FFRP-Timber Interface. Materials. 2026;19(5):991. doi:10.3390/ma19050991

BibTeX
@article{Xia2026,
  author = {Xia, Yuanyuan and Zhang, Weilong and Tian, Jianbo and Xia, Yangyang},
  title = {Analysis of Factors Influencing the Bonding Performance at the FFRP-Timber Interface},
  journal = {Materials},
  year = {2026},
  volume = {19},
  number = {5},
  pages = {991},
  doi = {10.3390/ma19050991}
}
Kostenlos starten →