EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Plasma-Driven Surface Functionalization: Enhancing the Corrosion Resistance of Aluminum via Atmospheric-Pressure Treatment

Carlos A Cuao Moreu iD, Reza Jafari iD, Shamim Roshan

Materials · 03.03.2026 · 19 (5) · 973

DOI: 10.3390/ma19050973 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Materials, online erschienen am 03.03.2026. Verfasst von Carlos A Cuao Moreu und 2 weiteren Autor:innen. Beteiligte Einrichtung: Department of Applied Sciences, Université du Québec à Chicoutimi (UQAC), 555 Boul. de L'université, Chicoutimi, QC G7H 2B1, Canada. Die Arbeit wurde bisher 2-mal zitiert (Crossref) und nennt 55 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Wellcome Trust, Fonds de Recherche du Québec - Nature et Technologies.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Aluminum and its alloys are employed in different industries due to their versatile properties (low density, resistance to corrosion, thermal conductivity). However, the corrosion properties of these alloys can be enhanced through protection methods. In this paper, the effect of surface treatment through atmospheric pressure plasma on the corrosion properties of a 6061 aluminum alloy was evaluated. The corrosion resistance was evaluated using electrochemical impedance spectroscopy. The jet-substrate distance and number of passes were selected as the plasma process parameters. The plasma treatment allowed the formation of a passive layer that exhibits higher corrosion resistance than the untreated substrate, corresponding to an increase of nearly three orders of magnitude in polarization resistance. Further, the passive layer’s morphological characteristics and chemical composition were analyzed through scanning electron microscopy with energy dispersive spectroscopy, optical profilometry, and X-ray photoelectron spectroscopy, where an increase of around 40% in oxygen content supports the presence of an oxygen-rich layer on the surface.

Schlagwörter

Stichwörter der Autor:innen

aluminumaluminum oxideatmospheric pressure plasmacorrosion resistancefunctionalizationplasma treatment

Autor:innen und Institutionen

  • Department of Applied Sciences, Université du Québec à Chicoutimi (UQAC), 555 Boul. de L'université, Chicoutimi, QC G7H 2B1, Canada.

ORCID-Profile: Carlos A Cuao Moreu, Reza Jafari

Förderung

  • Wellcome Trust
  • Fonds de Recherche du Québec - Nature et Technologies

Zitieren

APA

Cuao Moreu, C. A., Jafari, R., & Roshan, S. (2026). Plasma-Driven Surface Functionalization: Enhancing the Corrosion Resistance of Aluminum via Atmospheric-Pressure Treatment. Materials, 19(5), 973. https://doi.org/10.3390/ma19050973

Vancouver

Cuao Moreu CA, Jafari R, Roshan S. Plasma-Driven Surface Functionalization: Enhancing the Corrosion Resistance of Aluminum via Atmospheric-Pressure Treatment. Materials. 2026;19(5):973. doi:10.3390/ma19050973

BibTeX
@article{CuaoMoreu2026,
  author = {Cuao Moreu, Carlos A and Jafari, Reza and Roshan, Shamim},
  title = {Plasma-Driven Surface Functionalization: Enhancing the Corrosion Resistance of Aluminum via Atmospheric-Pressure Treatment},
  journal = {Materials},
  year = {2026},
  volume = {19},
  number = {5},
  pages = {973},
  doi = {10.3390/ma19050973}
}
Kostenlos starten →