EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Study on Interfacial Crack of Piezoelectric Bimaterials Under Dynamic Loading

Yani Zhang, Junlin Li iD, Xiangyu Li, Junye Ma

Materials · 02.03.2026 · 19 (5) · 964

DOI: 10.3390/ma19050964 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Materials, online erschienen am 02.03.2026. Verfasst von Yani Zhang und 3 weiteren Autor:innen. Beteiligte Einrichtung: School of Applied Science, Taiyuan University of Science and Technology, Taiyuan 030024, China. Die Arbeit nennt 25 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Nature Science Foundation of China, Shanxi Provincial Key Research and Development Project, Taiyuan University of Science and Technology doctoral research start-up fund.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

To meet the requirements of effectiveness and strength in actual engineering, based on the dynamic fracture characteristics, the dynamic propagation of orthogonal anisotropic interface cracks in piezoelectric bimaterials was analyzed. By performing Laplace transformation and Fourier transformation on the governing equations, the problem was transformed into a singular integral equation. Using the Chebyshev point method and Laplace inversion, the stress and electric displacement intensity factors at the crack tip of the orthogonal anisotropic interface were obtained. The results show that the crack length affects the dimensionless function. The longer the crack, the larger the dimensionless function. Under certain conditions, the smaller the elastic parameters, the smaller the dimensionless dynamic stress intensity factor. At the same time, the impact time also affects the dynamic crack propagation. With the passage of time, the dimensionless function first increases, then reaches a peak, and finally oscillates and converges to the static value. On this basis, the response surface method was used for analysis and prediction. The R2 value of the random forest model is 0.9886, which indicates that the model has high predictive accuracy. When the optimal values of A (d1/a), B (cpt/a) and C (c44(2)/c44(1)) are 0.4045, 1.6797 and 1.9035 respectively, the stress intensity reaches its maximum value of 1.3375.

Schlagwörter

Stichwörter der Autor:innen

dynamic fractureintegral transformationinterfacial cracknon-dimensional functionpiezoelectric bimaterials

Autor:innen und Institutionen

  • School of Applied Science, Taiyuan University of Science and Technology, Taiyuan 030024, China.
  • School of Materials Science and Engineering, Taiyuan University of Science and Technology, Taiyuan 030024, China.

ORCID-Profile: Junlin Li

Förderung

  • National Nature Science Foundation of China
  • Shanxi Provincial Key Research and Development Project
  • Taiyuan University of Science and Technology doctoral research start-up fund
  • National Natural Science Foundation of China

Zitieren

APA

Zhang, Y., Li, J., Li, X., & Ma, J. (2026). Study on Interfacial Crack of Piezoelectric Bimaterials Under Dynamic Loading. Materials, 19(5), 964. https://doi.org/10.3390/ma19050964

Vancouver

Zhang Y, Li J, Li X, Ma J. Study on Interfacial Crack of Piezoelectric Bimaterials Under Dynamic Loading. Materials. 2026;19(5):964. doi:10.3390/ma19050964

BibTeX
@article{Zhang2026,
  author = {Zhang, Yani and Li, Junlin and Li, Xiangyu and Ma, Junye},
  title = {Study on Interfacial Crack of Piezoelectric Bimaterials Under Dynamic Loading},
  journal = {Materials},
  year = {2026},
  volume = {19},
  number = {5},
  pages = {964},
  doi = {10.3390/ma19050964}
}
Kostenlos starten →