Study on Microstructural Evolution, Strengthening and Deformation Mechanisms of a CoCrNi-Based Medium-Entropy Alloy with Different Annealing Times
Materials · 28.02.2026 · 19 (5) · 945
DOI: 10.3390/ma19050945 ↗Kurz gefasst
Fachartikel in der Zeitschrift Materials, online erschienen am 28.02.2026. Verfasst von Pu Zhang und 4 weiteren Autor:innen. Beteiligte Einrichtung: School of Intelligent Manufacturing Industry, Shanxi University of Electronic Science and Technology, Linfen 041000, China. Die Arbeit wurde bisher 1-mal zitiert (Crossref) und nennt 28 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Natural Science Foundation of China, Fundamental Research Program of Shanxi Province, Opening Foundation of Shanxi Key Laboratory of Advanced Metal Materials for Special Environments.
Abstract (Originalsprache)
This study systematically investigates the influence of annealing time on the microstructure and mechanical properties of a (CoCrNi)93.5Al3Ti3C0.5 medium-entropy alloy. Following hot-rolling, the alloy was subjected to annealing treatments at 900 °C for 10 min (HA900-10) and 60 min (HA900-60). Microstructural characterization revealed that both alloys contained three types of precipitates: intergranular M23C6 and MC-type carbides, as well as γ′ phase. The HA900-10 specimen exhibited a low degree of recrystallization, whereas prolonged annealing promoted partial recrystallization, leading to the formation of a slightly heterogeneous structure (HA900-60). Additionally, the extended annealing facilitated the intragranular precipitation of nanoscale γ′ phase. Room-temperature tensile tests demonstrated that the HA900-10 and HA900-60 specimens achieved yield strengths of 1276 MPa and 1202 MPa, with total elongations reaching 26% and 28%, respectively. Quantitative strengthening analysis indicated that the strength of HA900-10 primarily originated from dislocation and grain boundary strengthening. For HA900-60, an additional significant contribution arose from the dislocation shearing mechanism induced by the intragranular γ′ precipitates. Analysis of the deformation mechanisms revealed that planar slip, assisted by the formation of stacking faults, dominated the room-temperature deformation, thereby ensuring sustained work-hardening capacity. This research provides a theoretical foundation for tailoring the microstructure and properties of multi-phase medium-entropy alloys through annealing process control.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- School of Intelligent Manufacturing Industry, Shanxi University of Electronic Science and Technology, Linfen 041000, China.
- School of Mechanical Engineering, Taiyuan University of Science and Technology, Taiyuan 030024, China.
- School of Semiconductor and Physics, North University of China, Taiyuan 030051, China.
Förderung
- National Natural Science Foundation of China
- Fundamental Research Program of Shanxi Province
- Opening Foundation of Shanxi Key Laboratory of Advanced Metal Materials for Special Environments
Zitieren
APA
Zhang, P., Zhao, C., Wang, R., Liu, Y., & Chen, Y. (2026). Study on Microstructural Evolution, Strengthening and Deformation Mechanisms of a CoCrNi-Based Medium-Entropy Alloy with Different Annealing Times. Materials, 19(5), 945. https://doi.org/10.3390/ma19050945
Vancouver
Zhang P, Zhao C, Wang R, Liu Y, Chen Y. Study on Microstructural Evolution, Strengthening and Deformation Mechanisms of a CoCrNi-Based Medium-Entropy Alloy with Different Annealing Times. Materials. 2026;19(5):945. doi:10.3390/ma19050945
BibTeX
@article{Zhang2026,
author = {Zhang, Pu and Zhao, Chunjiang and Wang, Ruirui and Liu, Yongping and Chen, Yongan},
title = {Study on Microstructural Evolution, Strengthening and Deformation Mechanisms of a CoCrNi-Based Medium-Entropy Alloy with Different Annealing Times},
journal = {Materials},
year = {2026},
volume = {19},
number = {5},
pages = {945},
doi = {10.3390/ma19050945}
}
EUVIMED