EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Prediction of Bending Mechanical Behaviors of SiCf/SiC 2.5D Woven Composites with Random Pore Defects

Xiaomeng Wang, Tiantian Yang, Ling Wang, Weijie Xie, Kun Qian, Mingwei Chen, Haipeng Qiu, Diantang Zhang

Materials · 28.02.2026 · 19 (5) · 934

DOI: 10.3390/ma19050934 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Materials, online erschienen am 28.02.2026. Verfasst von Xiaomeng Wang und 7 weiteren Autor:innen. Beteiligte Einrichtung: AVIC Composite Technology Center, AVIC Manufacturing Technology Institute, Beijing 101300, China. Die Arbeit nennt 31 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Fundamental Research Funds for the Central Universities.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The inevitable pore defects generated in the preparation process have a great impact on the mechanical properties of the ceramic matrix composites. However, the pore defects on the composites were ignored to a large extent in models established in the previous research. In this study, in order to investigate the bending damage behaviors of SiCf/SiC (SiC fiber-reinforced SiC matrix) angle-interlock (2.5D) woven composites prepared by the precursor immersion pyrolysis (PIP) method, a more precise full-scale model of composites was established by finite element (FE) method with taking into account of random pore defects generated by Monte Carlo algorithm. Micro-computed tomography (Micro-CT) was employed to acquire the statistical data of the yarns and pores of SiCf/SiC 2.5D woven composites. A bending test was conducted to study the damage behaviors of the composite and compared with the prediction of the FE model. The result shows that the proposed model with random pores can predict the mechanical damage behavior of SiCf/SiC 2.5D woven composites effectively under three-point bending. The simulated bending strength shows a good agreement with the experimental data, with a relative error of approximately 4.6%.

Schlagwörter

Stichwörter der Autor:innen

2.5D woven reinforcementMicro-CT analysisSiCf/SiC compositesnumerical simulationspore defectsthree-point bending

Autor:innen und Institutionen

  • AVIC Composite Technology Center, AVIC Manufacturing Technology Institute, Beijing 101300, China.
  • Department of Astronautic Science and Mechanics, Harbin Institute of Technology, Harbin 150001, China.
  • Key Laboratory of Special Protective Textiles, Ministry of Education, College of Textile Science and Engineering, Jiangnan University, Wuxi 214122, China.

Förderung

  • Fundamental Research Funds for the Central Universities

Zitieren

APA

Wang, X., Yang, T., Wang, L., Xie, W., Qian, K., Chen, M., Qiu, H., & Zhang, D. (2026). Prediction of Bending Mechanical Behaviors of SiCf/SiC 2.5D Woven Composites with Random Pore Defects. Materials, 19(5), 934. https://doi.org/10.3390/ma19050934

Vancouver

Wang X, Yang T, Wang L, Xie W, Qian K, Chen M, et al. Prediction of Bending Mechanical Behaviors of SiCf/SiC 2.5D Woven Composites with Random Pore Defects. Materials. 2026;19(5):934. doi:10.3390/ma19050934

BibTeX
@article{Wang2026,
  author = {Wang, Xiaomeng and Yang, Tiantian and Wang, Ling and Xie, Weijie and Qian, Kun and Chen, Mingwei and Qiu, Haipeng and Zhang, Diantang},
  title = {Prediction of Bending Mechanical Behaviors of SiCf/SiC 2.5D Woven Composites with Random Pore Defects},
  journal = {Materials},
  year = {2026},
  volume = {19},
  number = {5},
  pages = {934},
  doi = {10.3390/ma19050934}
}
Kostenlos starten →