EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Synthesis of Crystalline Copper Oxide (CuO) Nanoparticles via a Combined Polyol and Thermal Decomposition in Air

Mohammad Jahid Hasan iD, Matthew Moreno iD, Paige Law, Vikram Kapoor iD, Esteban Ureña-Benavides iD

Materials · 28.02.2026 · 19 (5) · 926

DOI: 10.3390/ma19050926 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Materials, online erschienen am 28.02.2026. Verfasst von Mohammad Jahid Hasan und 4 weiteren Autor:innen. Beteiligte Einrichtung: Department of Biomedical Engineering and Chemical Engineering, The University of Texas at San Antonio, San Antonio, TX 78249, USA. Die Arbeit wurde bisher 4-mal zitiert (Crossref) und nennt 71 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Institute of Food and Agriculture, USDA National Institute of Food and Agriculture.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Copper(II) oxide (CuO) nanoparticles are of growing interest due to their versatility in catalysis, energy storage, and environmental remediation. In this work, a novel air-assisted polyol–thermal decomposition method was developed to synthesize crystalline CuO nanoparticles with a controlled size. The reaction used copper(II) acetate in 1,4-butanediol at 140 °C under varying airflow conditions and reaction times, followed by calcination at 400 °C in air. Continuous air bubbling minimized the formation of Cu2O and metallic Cu, while maximizing the CuO yield with shortened reaction times. The optimal conditions involved a 4 h polyol reaction while purging air at 1800 cm3/min, followed by 4 h of calcination. This method resulted in polycrystalline monoclinic CuO nanoparticles with a size of 73 ± 32 nm, as observed by TEM and XRD. FT-IR and Raman spectroscopy verified the compositional purity of the nanoparticles. To enhance colloidal stability, a citrate coating reaction of CuO was optimized using sodium citrate dihydrate or citric acid in either water or 1,4-butanediol. The optimal coating conditions employed sodium citrate in water with bath sonication and overhead stirring, yielding a zeta potential of −40.6 ± 0.4 mV at pH 7. This work provides a practical and tunable method for producing high-quality CuO nanoparticles suitable for diverse applications.

Schlagwörter

Stichwörter der Autor:innen

Raman spectroscopy of CuOXRDcitrate coating of CuO NPscolloidal stability of CuO NPscopper oxide (CuO) nanoparticleslattice spacingmonoclinic CuOpolyol and thermal decomposition method

Autor:innen und Institutionen

  • Department of Biomedical Engineering and Chemical Engineering, The University of Texas at San Antonio, San Antonio, TX 78249, USA.
  • School of Civil & Environmental Engineering, and Construction Management, University of Texas at San Antonio, San Antonio, TX 78249, USA.

ORCID-Profile: Mohammad Jahid Hasan, Matthew Moreno, Vikram Kapoor, Esteban Ureña-Benavides

Förderung

  • National Institute of Food and Agriculture
  • USDA National Institute of Food and Agriculture

Zitieren

APA

Hasan, M. J., Moreno, M., Law, P., Kapoor, V., & Ureña-Benavides, E. (2026). Synthesis of Crystalline Copper Oxide (CuO) Nanoparticles via a Combined Polyol and Thermal Decomposition in Air. Materials, 19(5), 926. https://doi.org/10.3390/ma19050926

Vancouver

Hasan MJ, Moreno M, Law P, Kapoor V, Ureña-Benavides E. Synthesis of Crystalline Copper Oxide (CuO) Nanoparticles via a Combined Polyol and Thermal Decomposition in Air. Materials. 2026;19(5):926. doi:10.3390/ma19050926

BibTeX
@article{Hasan2026,
  author = {Hasan, Mohammad Jahid and Moreno, Matthew and Law, Paige and Kapoor, Vikram and Ureña-Benavides, Esteban},
  title = {Synthesis of Crystalline Copper Oxide (CuO) Nanoparticles via a Combined Polyol and Thermal Decomposition in Air},
  journal = {Materials},
  year = {2026},
  volume = {19},
  number = {5},
  pages = {926},
  doi = {10.3390/ma19050926}
}
Kostenlos starten →