EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Effect of Foam Formulation on Magnesium Sulfate Cement Performance

Dongqing Zhong, Hanxue Diao, Tao Pan, Guoliang Qu, Jianzhou Du iD, Jianyong Lu

Materials · 27.02.2026 · 19 (5) · 913

DOI: 10.3390/ma19050913 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Materials, online erschienen am 27.02.2026. Verfasst von Dongqing Zhong und 5 weiteren Autor:innen. Beteiligte Einrichtung: Institute of Straw Building Materials Ecology, Yancheng Institute of Technology, Yancheng 224002, China. Die Arbeit wurde bisher 1-mal zitiert (Crossref) und nennt 36 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Primary Research & Developement Plan of Jiangsu Province, Primary Research & Development Plan of Jiangsu Province.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

In this study, the density of magnesium sulfate-based foam concrete was regulated by adjusting the foam dosage and the ratio of the foam stabilizer xanthan gum (XG) to the specialized foaming agent GX-7. The evolution of the pore structure was evaluated using bleeding rate tests and scanning electron microscopy (SEM). This investigation further elucidated the critical roles of density variation and pore morphology in determining the mechanical performance (compressive strength) and thermal insulation efficiency of the material. The results indicate that increasing the addition of high-stability modified foam significantly increased the pore density of the ultra-lightweight foam concrete while simultaneously reducing the average pore diameter. These microstructural changes led to a progressive decrease in bulk density, accompanied by a corresponding reduction in compressive strength. When the foam dosage reached 100% of the MgO mass, the material’s density decreased to 136.3 kg/m3, with a corresponding thermal conductivity of 0.081 W/(m·K). SEM micrographs revealed that, under these conditions, the pores exhibited a uniform morphology and well-defined structure, indicating an optimized pore architecture. However, when the foaming multiplier exceeded 125%, the frequency of bubble rupture increased markedly.

Schlagwörter

Stichwörter der Autor:innen

foam concretemodified magnesium sulfate cementpore structurethermal conductivityultralight

Autor:innen und Institutionen

  • Institute of Straw Building Materials Ecology, Yancheng Institute of Technology, Yancheng 224002, China.
  • Jiangsu Sanling Abrasives Co., Ltd., Yancheng 224003, China.
  • Suzhou Loucheng New Materials Technology Co., Ltd., Suzhou 215443, China.

ORCID-Profile: Jianzhou Du

Förderung

  • Primary Research & Developement Plan of Jiangsu Province
  • Primary Research & Development Plan of Jiangsu Province

Zitieren

APA

Zhong, D., Diao, H., Pan, T., Qu, G., Du, J., & Lu, J. (2026). Effect of Foam Formulation on Magnesium Sulfate Cement Performance. Materials, 19(5), 913. https://doi.org/10.3390/ma19050913

Vancouver

Zhong D, Diao H, Pan T, Qu G, Du J, Lu J. Effect of Foam Formulation on Magnesium Sulfate Cement Performance. Materials. 2026;19(5):913. doi:10.3390/ma19050913

BibTeX
@article{Zhong2026,
  author = {Zhong, Dongqing and Diao, Hanxue and Pan, Tao and Qu, Guoliang and Du, Jianzhou and Lu, Jianyong},
  title = {Effect of Foam Formulation on Magnesium Sulfate Cement Performance},
  journal = {Materials},
  year = {2026},
  volume = {19},
  number = {5},
  pages = {913},
  doi = {10.3390/ma19050913}
}
Kostenlos starten →