EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Optimizing Machine Learning with SSA and PSO for Anchor Bolt–Grout Bond Strength Prediction

Detan Liu, Chenglin Liu, Hongwei Zhang, Meng Cui, Chuankai He, Junjie Wang

Materials · 27.02.2026 · 19 (5) · 906

DOI: 10.3390/ma19050906 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Materials, online erschienen am 27.02.2026. Verfasst von Detan Liu und 5 weiteren Autor:innen. Beteiligte Einrichtung: Datang Hydropower Science & Technology Research Institute Co., Ltd., Chengdu 610083, China. Die Arbeit wurde bisher 1-mal zitiert (Crossref) und nennt 82 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: 1. Guangxi Young Elite Scientist Sponsorship Program, 2. National Natural Science Foundation of China, Guangxi Young Elite Scientist Sponsorship Program.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The bond strength (τ) of the interface between the anchor bolt and grouting body (or rebar–concrete) is a key indicator used to evaluate the bearing capacity of anchorage engineering. And when rebars are subject to corrosion, τ also serves as an important durability metric. However, traditional experimental measurement of τ is complex, time-consuming and labor-intensive. In this study, based on pullout test data from 429 rebar–concrete specimens, we develop a machine learning method to construct a prediction model with strong generalization ability. Fundamental features—including specimen geometry, dimensions, material strengths, and corrosion rate—are used as inputs. The Sparrow Search Algorithm (SSA) and Particle Swarm Optimization (PSO) are used to fine-tune the hyperparameters of three machine learning models which are Random Forest (RF), Least Squares Boosting (LSBoost), and Generalized Additive Model (GAM). We perform a comparative error analysis of each model and benchmark them against three empirical formulas for τ. The unoptimized models exhibit low predictive accuracy and clear overfitting. After optimization using SSA and PSO algorithms, the prediction accuracy and overfitting issues are significantly improved, with the PSO-LSBoost model achieving the best performance (R2 = 0.93). The PSO-LSBoost model’s prediction accuracy for τ far exceeds that of the three empirical formulas. SHAP analysis reveals that the corrosion rate (Cw) contributes most to τ, while the rebar type (ST) contributes least. This work introduces a novel, efficient approach for predicting anchorage bond strength and assessing bolt durability, thereby enhancing the reliability of anchorage structures.

Schlagwörter

Stichwörter der Autor:innen

SHAP analysiscorroded anchor boltsinterface bond strengthmachine learningparticle swarm optimization algorithmsparrow search algorithm

Autor:innen und Institutionen

  • Datang Hydropower Science & Technology Research Institute Co., Ltd., Chengdu 610083, China.
  • College of Civil and Transportation Engineering, Hohai University, Nanjing 210098, China.
  • School of Materials Science and Engineering, Chongqing Jiaotong University, Chongqing 400074, China.
  • College of Water Conservancy and Hydropower Engineering, Hohai University, Nanjing, 210098, China.

Förderung

  • 1. Guangxi Young Elite Scientist Sponsorship Program
  • 2. National Natural Science Foundation of China
  • Guangxi Young Elite Scientist Sponsorship Program
  • National Natural Science Foundation of China

Zitieren

APA

Liu, D., Liu, C., Zhang, H., Cui, M., He, C., & Wang, J. (2026). Optimizing Machine Learning with SSA and PSO for Anchor Bolt–Grout Bond Strength Prediction. Materials, 19(5), 906. https://doi.org/10.3390/ma19050906

Vancouver

Liu D, Liu C, Zhang H, Cui M, He C, Wang J. Optimizing Machine Learning with SSA and PSO for Anchor Bolt–Grout Bond Strength Prediction. Materials. 2026;19(5):906. doi:10.3390/ma19050906

BibTeX
@article{Liu2026,
  author = {Liu, Detan and Liu, Chenglin and Zhang, Hongwei and Cui, Meng and He, Chuankai and Wang, Junjie},
  title = {Optimizing Machine Learning with SSA and PSO for Anchor Bolt–Grout Bond Strength Prediction},
  journal = {Materials},
  year = {2026},
  volume = {19},
  number = {5},
  pages = {906},
  doi = {10.3390/ma19050906}
}
Kostenlos starten →