EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Investigation of the Strength–Ductility Balance in an Industrial-Grade TC18 Titanium Alloy: The Pivotal Role of β Grain Size

Jing Wang, Xiaodong Zhan, Dongdong Li, Lehua Liu iD, Junyang He iD, Jinyang Ge, Xiaoyong Zhang

Materials · 27.02.2026 · 19 (5) · 892

DOI: 10.3390/ma19050892 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Materials, online erschienen am 27.02.2026. Verfasst von Jing Wang und 6 weiteren Autor:innen. Beteiligte Einrichtung: State Key Laboratory of Powder Metallurgy, Central South University, Changsha 410083, China. Die Arbeit wurde bisher 1-mal zitiert (Crossref) und nennt 55 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Special Funds of the National Natural Science Foundation of China, National Natural Science Foundation of China, Joint Fund for Regional Innovation of Hunan Provincial Natural Science Foundation.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The β grain size in titanium alloys during industrial forging is critical for balancing toughness, cost-effectiveness, and processability. To address the industrial challenge of high cost and difficulty in refining β grains to the tens of micrometers scale, this study investigates the feasibility of achieving a superior strength–ductility balance in TC18 alloy with near-industrial coarse β grains (296~857 μm) under room temperature tension. A pronounced inverse correlation is observed between β grain size and both strength and ductility. The yield strength–grain size relationship follows the Hall–Petch effect, while the anomalous increase in ductility for fine-grained specimens is attributed to three factors. First, smaller grains provide a higher grain boundary density, promoting stress redistribution and mitigating stress concentrations. Second, more uniform stress distribution induces thinner, denser kink bands that enhance plasticity. Third, strain-induced martensite evolves from discrete nanoscale particles to discontinuous lines and ultimately coalesces into continuous planar bands along the (112)β and (110)β planes. This phase transformation, which initiates below a critical grain size of ~500 μm, further alleviates stress concentrations towards slip bands and contributes to dynamic work hardening. The findings demonstrate that coordinated deformation mechanisms enable excellent mechanical performance even in coarse-grained microstructures, providing a practical pathway for optimizing industrial-grade titanium alloys.

Schlagwörter

Stichwörter der Autor:innen

TC18 alloydeformation mechanismgrain sizestrain-induced martensitework hardening rate

Autor:innen und Institutionen

  • State Key Laboratory of Powder Metallurgy, Central South University, Changsha 410083, China.
  • Hunan Xiangtou Goldsky Titanium Industry Technology Co., Ltd., Changde 415001, China.
  • State Key Laboratory for Materials Processing and Die and Mould Technology, School of Materials Science and Engineering, Huazhong University of Science and Technology, Wuhan 430074, China.
  • National Engineering Research Center of Near-Net-Shape Forming for Metallic Materials, Guangdong Provincial Key Laboratory for Processing and Forming of Advanced Metallic Materials, South China University of Technology,…
  • School of Mechanical and Electrical Engineering, Central South University, Changsha 410083, China.

ORCID-Profile: Lehua Liu, Junyang He

Förderung

  • Special Funds of the National Natural Science Foundation of China
  • National Natural Science Foundation of China
  • Joint Fund for Regional Innovation of Hunan Provincial Natural Science Foundation
  • the Special Funds of the National Natural Science Foundation of China
  • the National Natural Science Foundation of China
  • the Joint Fund for Regional Innovation of Hunan Provincial Natural Science Foundation

Zitieren

APA

Wang, J., Zhan, X., Li, D., Liu, L., He, J., Ge, J., & Zhang, X. (2026). Investigation of the Strength–Ductility Balance in an Industrial-Grade TC18 Titanium Alloy: The Pivotal Role of β Grain Size. Materials, 19(5), 892. https://doi.org/10.3390/ma19050892

Vancouver

Wang J, Zhan X, Li D, Liu L, He J, Ge J, et al. Investigation of the Strength–Ductility Balance in an Industrial-Grade TC18 Titanium Alloy: The Pivotal Role of β Grain Size. Materials. 2026;19(5):892. doi:10.3390/ma19050892

BibTeX
@article{Wang2026,
  author = {Wang, Jing and Zhan, Xiaodong and Li, Dongdong and Liu, Lehua and He, Junyang and Ge, Jinyang and Zhang, Xiaoyong},
  title = {Investigation of the Strength–Ductility Balance in an Industrial-Grade TC18 Titanium Alloy: The Pivotal Role of β Grain Size},
  journal = {Materials},
  year = {2026},
  volume = {19},
  number = {5},
  pages = {892},
  doi = {10.3390/ma19050892}
}
Kostenlos starten →