EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Low-Concentration Chemical Pretreatment of Lignocellulose Biomass Derived from Hemp Hurds, Agricultural Waste: Comparative Characterisation of Various Pretreatment Methods

Ziningi Rosebud Myeni iD, Farai Dziike iD, Tshwafo Elias Motaung iD, Nirmala Deenadayalu iD

Materials · 25.02.2026 · 19 (5) · 843

DOI: 10.3390/ma19050843 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Materials, online erschienen am 25.02.2026. Verfasst von Ziningi Rosebud Myeni und 3 weiteren Autor:innen. Beteiligte Einrichtung: Technology Transfer and Innovation Directorate, Durban University of Technology, Durban 4000, South Africa. Die Arbeit wurde bisher 7-mal zitiert (Crossref) und nennt 38 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Hemp hurds (HHs), a lignocellulosic agricultural waste, have the potential for bioconversion into bio-based products. However, the matrix structure of biomass comprising cellulose, hemicellulose, and lignin makes cellulose inaccessible. Pre-treatment is essential for accessing cellulose by removing lignin, hemicellulose, and extractives. This study compares lignocellulose structure modification of HH using low-concentration chemical pretreatment methods, including organosolvent, 60% ethanol (EtOH), 3% hydrogen peroxide with 3% ammonia (H2O2/NH3), and 2% sodium hydroxide (NaOH) with sonication. X-ray diffractor (XRD) analysis, using Segal method as a guide, showed that post treatments, the crystallinity index increased from 39.26% in untreated HH to 65.80% for NaOH-treated hurds. Polysaccharide content decreased compared to HH, attributed to the combination of solubilisation of hemicellulose, degradation of amorphous carbohydrates, and loss of sample during treatment wash. Although there was a reduction in polysaccharide content compared to HH, NaOH treated HH showed the highest total carbohydrate content of 48.6% and the most disrupted surface structure, based on scanning electron microscope (SEM) images at 2000× magnification. Fourier-transform infrared spectrophotometer (FTIR) analysis indicated a reduction in lignin and hemicellulose peaks for NaOH and H2O2/NH3 treatments, while thermogravimetric analyser (TGA) and derivative thermogravimetric analysis (DTG) results showed improved thermal stability for NaOH-treated samples. The ultrasound-assisted NaOH-treated sample had the most structural disruption in recovered solid fraction, based on comparative compositional and structural analyses. This gives a guide on the selection of pretreatment to pursue for HH processing.

Schlagwörter

Stichwörter der Autor:innen

HHagricultural wastecrystallinitydelignificationpretreatment

Autor:innen und Institutionen

  • Technology Transfer and Innovation Directorate, Durban University of Technology, Durban 4000, South Africa.
  • Department of Chemistry & Chemical Technology, Sefako Makgatho Health Sciences University, Ga-Rankuwa 0204, South Africa.

ORCID-Profile: Ziningi Rosebud Myeni, Farai Dziike, Tshwafo Elias Motaung, Nirmala Deenadayalu

Zitieren

APA

Myeni, Z. R., Dziike, F., Motaung, T. E., & Deenadayalu, N. (2026). Low-Concentration Chemical Pretreatment of Lignocellulose Biomass Derived from Hemp Hurds, Agricultural Waste: Comparative Characterisation of Various Pretreatment Methods. Materials, 19(5), 843. https://doi.org/10.3390/ma19050843

Vancouver

Myeni ZR, Dziike F, Motaung TE, Deenadayalu N. Low-Concentration Chemical Pretreatment of Lignocellulose Biomass Derived from Hemp Hurds, Agricultural Waste: Comparative Characterisation of Various Pretreatment Methods. Materials. 2026;19(5):843. doi:10.3390/ma19050843

BibTeX
@article{Myeni2026,
  author = {Myeni, Ziningi Rosebud and Dziike, Farai and Motaung, Tshwafo Elias and Deenadayalu, Nirmala},
  title = {Low-Concentration Chemical Pretreatment of Lignocellulose Biomass Derived from Hemp Hurds, Agricultural Waste: Comparative Characterisation of Various Pretreatment Methods},
  journal = {Materials},
  year = {2026},
  volume = {19},
  number = {5},
  pages = {843},
  doi = {10.3390/ma19050843}
}
Kostenlos starten →