Research on the Adhesive Strength of Different Bonding Structures for Modular Wind Turbine Blades
Materials · 14.02.2026 · 19 (4) · 735
DOI: 10.3390/ma19040735 ↗Kurz gefasst
Fachartikel in der Zeitschrift Materials, online erschienen am 14.02.2026. Verfasst von Junpeng Yang und 3 weiteren Autor:innen. Beteiligte Einrichtung: College of Mechanical Engineering, Xinjiang University, Ürümqi 830047, China. Die Arbeit wurde bisher 2-mal zitiert (Crossref) und nennt 32 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Natural Science Foundation of China, Science and Technology Programme Project of Xinjiang Uygur Autonomous Region, School of Mechanical Engineering of Xinjiang University.
Abstract (Originalsprache)
To address the manufacturing and transportation challenges of large wind turbine blades, adhesive joints in modular blades have become a research focus. This study investigates six typical adhesive joint configurations for CFRP laminates using quasi-static three-point bending experiments and cohesive-zone finite element simulations. The adhesive interface is modeled with a bilinear traction–separation law using zero-thickness cohesive elements to capture damage initiation and propagation. Among the six designs, the double-slope joint exhibits the best static performance, achieving the highest peak load of 1017.26 N and showing delayed damage evolution. The superiority of the double-slope design is further examined at the blade level via a numerical cantilever model of equal-section modular blade segments under flapwise and edgewise loading. The predicted peak loads reach 9.82 × 107 N (flapwise) and 5.51 × 107 N (edgewise), ranking the double-slope joint highest among the investigated configurations. The findings show that the double-slope joint improves load capacity and resistance to degradation, and reveal failure mechanisms of adhesive joints, providing theoretical support for blade structural design.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- College of Mechanical Engineering, Xinjiang University, Ürümqi 830047, China.
Förderung
- National Natural Science Foundation of China
- Science and Technology Programme Project of Xinjiang Uygur Autonomous Region
- School of Mechanical Engineering of Xinjiang University
- Science and Technology Program Project of the Xinjiang Uygur Autonomous Region
Zitieren
APA
Yang, J., Jin, A., Li, J., & Li, F. (2026). Research on the Adhesive Strength of Different Bonding Structures for Modular Wind Turbine Blades. Materials, 19(4), 735. https://doi.org/10.3390/ma19040735
Vancouver
Yang J, Jin A, Li J, Li F. Research on the Adhesive Strength of Different Bonding Structures for Modular Wind Turbine Blades. Materials. 2026;19(4):735. doi:10.3390/ma19040735
BibTeX
@article{Yang2026,
author = {Yang, Junpeng and Jin, Afang and Li, Junhan and Li, Fengrong},
title = {Research on the Adhesive Strength of Different Bonding Structures for Modular Wind Turbine Blades},
journal = {Materials},
year = {2026},
volume = {19},
number = {4},
pages = {735},
doi = {10.3390/ma19040735}
}
EUVIMED