EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

From Photoluminescence Optimization to Green LED Fabrication: The Role of Molar Precursor Ratio in Carbon Dots

Danilo Trapani iD, Filippo Saiano iD, Simona Boninelli, Sajeel Khan, Isodiana Crupi iD, Roberto Macaluso iD, Mauro Mosca iD

Materials · 11.02.2026 · 19 (4) · 687

DOI: 10.3390/ma19040687 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Materials, online erschienen am 11.02.2026. Verfasst von Danilo Trapani und 6 weiteren Autor:innen. Beteiligte Einrichtung: Thin Films Laboratory, Department of Engineering, University of Palermo, IT 90128 Palermo, Italy. Die Arbeit wurde bisher 4-mal zitiert (Crossref) und nennt 65 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Next Generation EU - program "RESTART", S2 SUPER - Programmable Networks, Cascade project PRISM, Next Generation EU project "SAMOTHRACE", Next Generation EU: "EUROSMART 2025 Call", project PLANETA.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Carbon dots have emerged as promising luminescent materials for solid-state lighting and color-conversion applications; however, their photoluminescence efficiency in the solid state is often limited by aggregation-induced quenching phenomena. In this work, we systematically investigate the role of the molar precursor ratio on the optical properties of green-emitting carbon dots, with the aim of establishing a direct link between synthesis parameters, photoluminescence optimization, and device-level performance. By carefully tuning the precursor ratio during synthesis, a significant enhancement of photoluminescence intensity and a strong suppression of solid-state quenching are achieved while preserving spectral stability in the green region. The optimized carbon dots exhibit improved radiative recombination and favorable optical characteristics for solid-state integration. Building on these results, the carbon dots are successfully employed as color-conversion layers in the fabrication of green light-emitting diodes, demonstrating efficient green emission under electrical excitation. This study highlights precursor ratio engineering as a simple and effective strategy to tailor carbon dot photoluminescence and provides a clear pathway from materials optimization to the realization of green color-conversion LED devices.

Schlagwörter

Stichwörter der Autor:innen

carbon dotscitric acidcolor conversiongreen LEDsphotoluminescence quenchingsolid-state luminescenceurea

Autor:innen und Institutionen

  • Thin Films Laboratory, Department of Engineering, University of Palermo, IT 90128 Palermo, Italy.
  • Department of Agricultural, Food and Forestry Sciences, University of Palermo, IT 90128 Palermo, Italy.
  • CNR-IMM, Department of Physics and Astronomy, University of Catania, IT 95123 Catania, Italy.
  • Department of Applied Science and Technology, Politecnico di Torino, IT 10129 Turin, Italy.

ORCID-Profile: Danilo Trapani, Filippo Saiano, Isodiana Crupi, Roberto Macaluso, Mauro Mosca

Förderung

  • Next Generation EU - program "RESTART", S2 SUPER - Programmable Networks, Cascade project PRISM
  • Next Generation EU project "SAMOTHRACE"
  • Next Generation EU: "EUROSMART 2025 Call", project PLANETA
  • the European Union under the Italian National Recovery and Resilience Plan (NRRP) of Next Generation EU
  • the European Union—Next Generation EU project “SAMOTHRACE” (SiciliAn MicronanOTecH Research And innovation CEnter)—Funds
  • the European Union—Next Generation EU

Zitieren

APA

Trapani, D., Saiano, F., Boninelli, S., Khan, S., Crupi, I., Macaluso, R., & Mosca, M. (2026). From Photoluminescence Optimization to Green LED Fabrication: The Role of Molar Precursor Ratio in Carbon Dots. Materials, 19(4), 687. https://doi.org/10.3390/ma19040687

Vancouver

Trapani D, Saiano F, Boninelli S, Khan S, Crupi I, Macaluso R, et al. From Photoluminescence Optimization to Green LED Fabrication: The Role of Molar Precursor Ratio in Carbon Dots. Materials. 2026;19(4):687. doi:10.3390/ma19040687

BibTeX
@article{Trapani2026,
  author = {Trapani, Danilo and Saiano, Filippo and Boninelli, Simona and Khan, Sajeel and Crupi, Isodiana and Macaluso, Roberto and Mosca, Mauro},
  title = {From Photoluminescence Optimization to Green LED Fabrication: The Role of Molar Precursor Ratio in Carbon Dots},
  journal = {Materials},
  year = {2026},
  volume = {19},
  number = {4},
  pages = {687},
  doi = {10.3390/ma19040687}
}
Kostenlos starten →