Controllable Preparation and Filtration Performance of New Composite Materials for Mining Masks
Materials · 06.02.2026 · 19 (3) · 626
DOI: 10.3390/ma19030626 ↗Kurz gefasst
Fachartikel in der Zeitschrift Materials, online erschienen am 06.02.2026. Verfasst von Xin Zhang und 6 weiteren Autor:innen. Beteiligte Einrichtung: College of Architecture and Energy Engineering, Wenzhou University of Technology, Wenzhou 325000, China. Die Arbeit wurde bisher 2-mal zitiert (Crossref) und nennt 47 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: the Shaanxi Provincial Department of Education Service Local Special Plan Project, Zhejiang Provincial Natural Science Foundation of China, Scientific Research Fund of Zhejiang Provincial Education Department.
Abstract (Originalsprache)
The effective isolation of high-concentration dust during mining and transportation processes is a hot issue of occupational health concern for workers. Based on the characteristics of graphene and its derivatives, a new type of mining mask made of graphene oxide polypropylene composite material (GO polypropylene composite material) and reduced graphene oxide polypropylene composite material (rGO polypropylene composite material) was prepared using the direct impregnation method. Moreover, particle filtration performance tests were conducted under different gas flow conditions. The results showed that, at the same concentration, the reduction group (rGO polypropylene composite material) had more compliance indicators, and the comprehensive performance ranking was as follows: reduction group (rGO polypropylene composite material) > oxidation group (GO polypropylene composite material) > control group (polypropylene composite material). The reduction group with a concentration of 0.3 g/L showed the best overall performance. At a flow rate of 1.0 m3/h, the filtration efficiency of PM10 (95.61%) and PM2.5 (95.01%) met the relevant standards, while PM1.0 (94.88%) was close to the standard threshold (with a difference of only −0.12%), significantly better than the control (PM10, 93.39%) and the oxidation (PM10, 95.01%) groups. Moreover, at various flow rates, its particulate matter concentration was significantly lower than that for the oxidation and control groups. Overall, it meets the requirements of providing ideal filtration effects under different work intensities (low, medium, and high flow rates), thus providing strong technical support for individual protection of mine workers and a theoretical basis and practical guidance for reducing occupational diseases caused by dust exposure in mines.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- College of Architecture and Energy Engineering, Wenzhou University of Technology, Wenzhou 325000, China.
- School of Resources Engineering, Xi'an University of Architecture and Technology, Xi'an 710055, China.
- School of Building Services Science and Engineering, Xi'an University of Architecture and Technology, Xi'an 710055, China.
Förderung
- the Shaanxi Provincial Department of Education Service Local Special Plan Project
- Zhejiang Provincial Natural Science Foundation of China
- Scientific Research Fund of Zhejiang Provincial Education Department
- Shaanxi Provincial Department of Education Service Local Special Plan Project
Zitieren
APA
Zhang, X., Zhang, C., Zhou, T., Sun, Z., Jin, Y., Mi, L., & Wu, S. (2026). Controllable Preparation and Filtration Performance of New Composite Materials for Mining Masks. Materials, 19(3), 626. https://doi.org/10.3390/ma19030626
Vancouver
Zhang X, Zhang C, Zhou T, Sun Z, Jin Y, Mi L, et al. Controllable Preparation and Filtration Performance of New Composite Materials for Mining Masks. Materials. 2026;19(3):626. doi:10.3390/ma19030626
BibTeX
@article{Zhang2026,
author = {Zhang, Xin and Zhang, Chenyu and Zhou, Tianyu and Sun, Zeyu and Jin, Yong and Mi, Lihua and Wu, Saisai},
title = {Controllable Preparation and Filtration Performance of New Composite Materials for Mining Masks},
journal = {Materials},
year = {2026},
volume = {19},
number = {3},
pages = {626},
doi = {10.3390/ma19030626}
}
EUVIMED