EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Mechanical and Microstructural Characterization of Trapezoidal Corrugated-Core Al Sandwich Panels Under Quasi-Static Compression

Alessandra Ceci iD, Girolamo Costanza iD, Maria Elisa Tata iD

Materials · 30.01.2026 · 19 (3) · 548

DOI: 10.3390/ma19030548 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Materials, online erschienen am 30.01.2026. Verfasst von Alessandra Ceci und 2 weiteren Autor:innen. Beteiligte Einrichtung: Department of Industrial Engineering, University of Rome Tor Vergata, 00133 Rome, Italy. Die Arbeit wurde bisher 3-mal zitiert (Crossref) und nennt 31 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Sandwich panels with trapezoidal (corrugated) cores combine low weight, high specific stiffness, and energy absorption capability. This study analyzes four configurations with different core heights by means of microstructural analyses (optical microscopy, SEM/EDS, XRD) and quasi-static compression tests. The tests yield stress–strain curves with an initial linear stage, a peak, a plateau, and a densification stage. Peak stresses range from 0.5 MPa for the thickest core (P1) to 6.2 MPa for the thinnest core (P4), while the energy absorbed density (EAD) increases with strain: at ε = 30% it varies from 0.031 to 0.670 J/cm3, and at ε = 50% the thin-core configuration reaches ≈1.113 J/cm3. The face sheets and the core are both manufactured from AA 3000 series (Al–Mn) aluminum alloy; widespread micro-porosity and Fe/Mn-rich phases are observed by SEM/EDS. XRD confirms aluminum with different peak intensities ascribable to the manufacturing texture. Increasing the core height promotes earlier local/global instabilities and reduces the peak stress; the thinnest core displays higher stiffness and peak loads. These findings support the use of trapezoidal corrugation where low weight and progressive strain are required.

Schlagwörter

Stichwörter der Autor:innen

SEM/EDSXRDaluminum 3000 seriesenergy absorptionmicrostructurequasi-static compressionsandwich panelstrapezoidal/corrugated core

Autor:innen und Institutionen

  • Department of Industrial Engineering, University of Rome Tor Vergata, 00133 Rome, Italy.

ORCID-Profile: Alessandra Ceci, Girolamo Costanza, Maria Elisa Tata

Zitieren

APA

Ceci, A., Costanza, G., & Tata, M. E. (2026). Mechanical and Microstructural Characterization of Trapezoidal Corrugated-Core Al Sandwich Panels Under Quasi-Static Compression. Materials, 19(3), 548. https://doi.org/10.3390/ma19030548

Vancouver

Ceci A, Costanza G, Tata ME. Mechanical and Microstructural Characterization of Trapezoidal Corrugated-Core Al Sandwich Panels Under Quasi-Static Compression. Materials. 2026;19(3):548. doi:10.3390/ma19030548

BibTeX
@article{Ceci2026,
  author = {Ceci, Alessandra and Costanza, Girolamo and Tata, Maria Elisa},
  title = {Mechanical and Microstructural Characterization of Trapezoidal Corrugated-Core Al Sandwich Panels Under Quasi-Static Compression},
  journal = {Materials},
  year = {2026},
  volume = {19},
  number = {3},
  pages = {548},
  doi = {10.3390/ma19030548}
}
Kostenlos starten →