Influence of Pd Coating Thickness and Pd Content in Sn-Based Solders on Interfacial IMC Formation and Microstructural Evolution in Solder/Ni Joints
Materials · 28.01.2026 · 19 (3) · 526
DOI: 10.3390/ma19030526 ↗Kurz gefasst
Fachartikel in der Zeitschrift Materials, online erschienen am 28.01.2026. Verfasst von Chao-Hong Wang und 3 weiteren Autor:innen. Beteiligte Einrichtung: Department of Chemical Engineering, National Chung Cheng University, Chiayi 621301, Taiwan. Die Arbeit wurde bisher 1-mal zitiert (Crossref) und nennt 29 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Science and Technology Council of Taiwan.
Abstract (Originalsprache)
Interfacial reactions between Sn-based solders and Au/Pd/Ni metallization were investigated at 260 °C, with particular emphasis on the effects of Pd and Sn thicknesses. Au/Pd/Ni substrates with Pd layers of approximately 70 nm, 200 nm, and 1 µm were reacted with Sn layers of about 50, 20, and 10 µm. Additionally, Sn-Pd and Sn-3Ag-Pd solders containing 0.1–1 wt.% Pd were reacted with Ni substrates. In the Sn/Au/Pd/Ni reactions, rapid dissolution of the Pd layer and partial Ni dissolution at the early stage promoted the formation of large amounts of faceted (Pd,Ni)Sn4. With increasing reaction time, continuous Ni diffusion enriched the interfacial region, leading to the nucleation and growth of Ni3Sn4. Once the Ni solubility limit in (Pd,Ni)Sn4 was exceeded, this phase gradually transformed into the thermodynamically more stable Ni3Sn4. In addition to phase evolution, Pd was found to significantly influence the interfacial grain morphology. Minor Pd additions enhanced the Ni3Sn4 nucleation, resulting in refined and columnar grains. In the Sn-Pd/Ni reactions, low Pd contents led to the rapid replacement of (Pd,Ni)Sn4 by Ni3Sn4, whereas higher Pd contents significantly enhanced the stability and interfacial retention of (Pd,Ni)Sn4. These results reveal that increasing Pd thickness or Pd content in the solder significantly enhances the stability of (Pd,Ni)Sn4, whereas reducing Sn thickness markedly accelerates interfacial reactions and phase transformation. The experimental observations can be consistently interpreted using a local interfacial equilibrium hypothesis based on the Sn-Pd-Ni phase diagram.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- Department of Chemical Engineering, National Chung Cheng University, Chiayi 621301, Taiwan.
ORCID-Profile: Chao-Hong Wang
Förderung
- National Science and Technology Council of Taiwan
Zitieren
APA
Wang, C. H., Li, C. A., Li, K. T., & Chiu, H. W. (2026). Influence of Pd Coating Thickness and Pd Content in Sn-Based Solders on Interfacial IMC Formation and Microstructural Evolution in Solder/Ni Joints. Materials, 19(3), 526. https://doi.org/10.3390/ma19030526
Vancouver
Wang CH, Li CA, Li KT, Chiu HW. Influence of Pd Coating Thickness and Pd Content in Sn-Based Solders on Interfacial IMC Formation and Microstructural Evolution in Solder/Ni Joints. Materials. 2026;19(3):526. doi:10.3390/ma19030526
BibTeX
@article{Wang2026,
author = {Wang, Chao-Hong and Li, Chu-An and Li, Kuan-Ting and Chiu, Hsuan-Wei},
title = {Influence of Pd Coating Thickness and Pd Content in Sn-Based Solders on Interfacial IMC Formation and Microstructural Evolution in Solder/Ni Joints},
journal = {Materials},
year = {2026},
volume = {19},
number = {3},
pages = {526},
doi = {10.3390/ma19030526}
}
EUVIMED