EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Compressive Failure Mechanisms of NCF Laminates with Double-Hole Defects

Songming Cai, Shi Yan, Lili Jiang, Zixiang Meng, Yongxin Niu

Materials · 26.01.2026 · 19 (3) · 495

DOI: 10.3390/ma19030495 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Materials, online erschienen am 26.01.2026. Verfasst von Songming Cai und 4 weiteren Autor:innen. Beteiligte Einrichtung: Architectural Engineering Institute, Harbin University of Science and Technology, Harbin 150080, China. Die Arbeit wurde bisher 4-mal zitiert (Crossref) und nennt 28 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Natural Science Foundation of China, Natural Science Fund Project of Xiamen of China, Scientific Research Fund Project of Xiamen City University of China.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Open-hole compression (OHC) tests were carried out on non-crimp fabric (NCF) laminates with varied open-hole orientation (angle to the loading direction) and inter-hole spacing. Failure modes were documented by scanning electron microscopy (SEM), and the compressive strength was quantified. Finite element simulations in Abaqus were developed to replicate the tests, establishing a progressive-damage model for open-hole laminates under compression. Intralaminar failure was described using the three-dimensional Hashin failure criterion and a modified matrix compression criterion incorporating shear coupling effects, while interlaminar delamination was modeled with cohesive elements, enabling the simulation of damage initiation, growth, delamination, and final collapse. The results show that hole orientation and spacing have a pronounced effect on open-hole compression (OHC) strength. A spacing threshold is observed, beyond which further increases in spacing provide little additional benefit. In contrast, the apparent elastic stiffness is essentially insensitive to hole spacing and orientation. The combined intralaminar and interlaminar model successfully reproduces the characteristic mechanical response—linear elasticity followed by catastrophic failure—in good agreement with the experiments.

Schlagwörter

Stichwörter der Autor:innen

composite laminatesdamage evolutionfinite element modelingopen-hole compression

Autor:innen und Institutionen

  • Architectural Engineering Institute, Harbin University of Science and Technology, Harbin 150080, China.
  • School of Civil Engineering and Architecture, Xiamen City University, Xiamen 361008, China.

Förderung

  • National Natural Science Foundation of China
  • Natural Science Fund Project of Xiamen of China
  • Scientific Research Fund Project of Xiamen City University of China

Zitieren

APA

Cai, S., Yan, S., Jiang, L., Meng, Z., & Niu, Y. (2026). Compressive Failure Mechanisms of NCF Laminates with Double-Hole Defects. Materials, 19(3), 495. https://doi.org/10.3390/ma19030495

Vancouver

Cai S, Yan S, Jiang L, Meng Z, Niu Y. Compressive Failure Mechanisms of NCF Laminates with Double-Hole Defects. Materials. 2026;19(3):495. doi:10.3390/ma19030495

BibTeX
@article{Cai2026,
  author = {Cai, Songming and Yan, Shi and Jiang, Lili and Meng, Zixiang and Niu, Yongxin},
  title = {Compressive Failure Mechanisms of NCF Laminates with Double-Hole Defects},
  journal = {Materials},
  year = {2026},
  volume = {19},
  number = {3},
  pages = {495},
  doi = {10.3390/ma19030495}
}
Kostenlos starten →