EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Polyethylene-Based Phase Change Materials Modified with Hexagonal Boron Nitride Nanoparticles with Enhanced Thermal Stability and Thermal Conductivity

Beata Macherzyńska iD, Adrianna Pitera iD, Katarzyna Nowicka-Dunal iD, Kinga Pielichowska iD

Materials · 23.01.2026 · 19 (3) · 455

DOI: 10.3390/ma19030455 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Materials, online erschienen am 23.01.2026. Verfasst von Beata Macherzyńska und 3 weiteren Autor:innen. Beteiligte Einrichtung: Department of Glass Technology and Amorphous Coatings, Faculty of Materials Science and Ceramics, AGH University of Krakow, Al. Mickiewicza 30, 30-05…. Die Arbeit wurde bisher 2-mal zitiert (Crossref) und nennt 35 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Ministry of Science and Higher Education, AGH University of Kraków.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Polyethylene waxes (PEWs) are considered promising mid-temperature phase change materials (PCMs). However, their low thermal conductivity limits both applicability and efficiency. One of the more interesting inorganic additives for PCMs is boron nitride (BN), which exhibits high thermal conductivity while remaining electrically insulating, excellent chemical and thermal stability, and good oxidation resistance. In this study, PEW was modified with hexagonal boron nitride (h-BN) in the range of 0.025 to 0.5 wt.%. Differential scanning calorimetry (DSC) results revealed that the addition of h-BN significantly alters the phase-transition behavior of polyethylene wax, broadens the melting and solidification temperature ranges, and reduces supercooling from 11 °C to 9 °C. Thermogravimetric analysis (TGA) showed that the incorporation of h-BN improves the thermal stability of the material. The temperature corresponding to 5% mass loss increased by about 50 °C after incorporation of more than 0.025% h-BN. The temperature of maximum mass-loss rate (TDTGmax) was shifted about 8 °C toward higher temperatures. FTIR results indicate that h-BN does not change the chemical structure of polyethylene waxes, but does affect their morphology and physical properties by increasing the thermal conductivity from 0.30 to 0.40 mW/K. These effects enable the design of composites with tunable properties for energy-storage applications.

Schlagwörter

Stichwörter der Autor:innen

boron nitridephase change materialspolyethylene waxthermal energy storage

Autor:innen und Institutionen

  • Department of Glass Technology and Amorphous Coatings, Faculty of Materials Science and Ceramics, AGH University of Krakow, Al. Mickiewicza 30, 30-059 Krakow, Poland.

ORCID-Profile: Beata Macherzyńska, Adrianna Pitera, Katarzyna Nowicka-Dunal, Kinga Pielichowska

Förderung

  • Ministry of Science and Higher Education
  • AGH University of Kraków

Zitieren

APA

Macherzyńska, B., Pitera, A., Nowicka-Dunal, K., & Pielichowska, K. (2026). Polyethylene-Based Phase Change Materials Modified with Hexagonal Boron Nitride Nanoparticles with Enhanced Thermal Stability and Thermal Conductivity. Materials, 19(3), 455. https://doi.org/10.3390/ma19030455

Vancouver

Macherzyńska B, Pitera A, Nowicka-Dunal K, Pielichowska K. Polyethylene-Based Phase Change Materials Modified with Hexagonal Boron Nitride Nanoparticles with Enhanced Thermal Stability and Thermal Conductivity. Materials. 2026;19(3):455. doi:10.3390/ma19030455

BibTeX
@article{Macherzyska2026,
  author = {Macherzyńska, Beata and Pitera, Adrianna and Nowicka-Dunal, Katarzyna and Pielichowska, Kinga},
  title = {Polyethylene-Based Phase Change Materials Modified with Hexagonal Boron Nitride Nanoparticles with Enhanced Thermal Stability and Thermal Conductivity},
  journal = {Materials},
  year = {2026},
  volume = {19},
  number = {3},
  pages = {455},
  doi = {10.3390/ma19030455}
}
Kostenlos starten →