From Corrosion Control to Cell Adhesion: Parascholzite as a Functional Interface for Biodegradable Zinc Alloys
Materials · 21.01.2026 · 19 (2) · 416
DOI: 10.3390/ma19020416 ↗Kurz gefasst
Fachartikel in der Zeitschrift Materials, online erschienen am 21.01.2026. Verfasst von Jaroslav Fojt und 6 weiteren Autor:innen. Beteiligte Einrichtung: Department of Metals and Corrosion Engineering, Faculty of Chemical Technology, University of Chemistry and Technology, Technicka 5, 166 28 Prague, C…. Die Arbeit wurde bisher 3-mal zitiert (Crossref) und nennt 27 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Czech Science Foundation.
Abstract (Originalsprache)
Zinc-based alloys are promising candidates for biodegradable implant applications; however, their rapid initial corrosion and limited cytocompatibility remain major challenges. In this study, a Zn-Ca-P layer in a form of parascholzite (CaZn2(PO4)2·2H2O) was prepared on a Zn-0.8Mg-0.2Sr alloy via anodic oxidation followed by short-time biomimetic calcium–phosphate deposition. The formation mechanism, corrosion behaviour, and preliminary biological response of the modified surface were systematically investigated. The Zn-Ca-P layer formed a compact and crystalline phosphate layer that significantly altered the corrosion response of the zinc substrate in Leibovitz L-15 medium containing foetal bovine serum. Electrochemical measurements revealed a pronounced improvement in corrosion resistance and a transition from rapid active dissolution to a controlled, ion-exchange-driven degradation mechanism. The moderate solubility of parascholzite enabled the gradual release of Zn2+ and Ca2+ ions while maintaining surface stability during immersion. Preliminary cell adhesion experiments demonstrated a clear enhancement of cytocompatibility for the Zn-Ca-P-layer-coated samples, where cells readily adhered and spread, in contrast to the bare alloy surface, which showed lower cell attachment. The improved biological response is attributed to the phosphate-rich surface chemistry, favourable surface morphology, and moderated corrosion behaviour. Overall, the parascholzite-like layer provides an effective strategy with which to regulate both corrosion and early cell–material interactions of zinc-based biodegradable alloys, highlighting its potential for temporary biomedical implant applications.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- Department of Metals and Corrosion Engineering, Faculty of Chemical Technology, University of Chemistry and Technology, Technicka 5, 166 28 Prague, Czech Republic.
- Department of Biochemistry and Microbiology, Faculty of Food and Biochemical Technology, University of Chemistry and Technology, Technicka 5, 166 28 Prague, Czech Republic.
ORCID-Profile: Jaroslav Fojt, Jakub Veselý, Jan Šťovíček, Jan Pokorný, Eva Jablonská, Zdeněk Míchal, Vojtěch Hybášek
Förderung
- Czech Science Foundation
Zitieren
APA
Fojt, J., Veselý, J., Šťovíček, J., Pokorný, J., Jablonská, E., Míchal, Z., & Hybášek, V. (2026). From Corrosion Control to Cell Adhesion: Parascholzite as a Functional Interface for Biodegradable Zinc Alloys. Materials, 19(2), 416. https://doi.org/10.3390/ma19020416
Vancouver
Fojt J, Veselý J, Šťovíček J, Pokorný J, Jablonská E, Míchal Z, et al. From Corrosion Control to Cell Adhesion: Parascholzite as a Functional Interface for Biodegradable Zinc Alloys. Materials. 2026;19(2):416. doi:10.3390/ma19020416
BibTeX
@article{Fojt2026,
author = {Fojt, Jaroslav and Veselý, Jakub and Šťovíček, Jan and Pokorný, Jan and Jablonská, Eva and Míchal, Zdeněk and Hybášek, Vojtěch},
title = {From Corrosion Control to Cell Adhesion: Parascholzite as a Functional Interface for Biodegradable Zinc Alloys},
journal = {Materials},
year = {2026},
volume = {19},
number = {2},
pages = {416},
doi = {10.3390/ma19020416}
}
EUVIMED