EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Load Transfer Theoretical Analysis of a Rigid Aircraft Pavement Contraction Joint Using a Novel Approach for Crack Characterization

Sean Jamieson iD, Greg White iD

Materials · 17.01.2026 · 19 (2) · 376

DOI: 10.3390/ma19020376 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Materials, online erschienen am 17.01.2026. Verfasst von Sean Jamieson und 1 weiteren Autor:innen. Beteiligte Einrichtung: School of Science, Technology and Engineering, University of the Sunshine Coast, Sippy Downs, QLD 4556, Australia. Die Arbeit wurde bisher 2-mal zitiert (Crossref) und nennt 48 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The contraction joints within paver runs are important for the design and construction of rigid aircraft pavements. These joints are typically un-doweled and sawn into the pavement to induce a crack. The joints control shrinkage cracking during curing, allow for thermal expansion and contraction, and provide load transfer through aggregate interlock joint stiffness between adjacent slabs. Aggregate interlock joint stiffness is typically modeled by assigning a spring element between two slabs that is indicative of the stiffness of the joint. However, that simplification may not accurately represent the complex interaction of irregularly shaped concrete faces and joint openings. Consequently, previous researchers have recommended modelling aggregate interlock stiffness based on physical crack shape. This research uses a novel approach to characterize crack shape through an idealized two-dimensional sinusoidal shape. Once the crack shape was defined, finite element methods were used to determine the significance of load, sublayer, and crack shape factors on load transfer values. It was determined that joint opening was the most significant factor for aggregate interlock load transfer. Future research is recommended to further validate the model against a larger data set, to confirm if the two-dimensional idealization of crack shape is an appropriate estimation of field conditions.

Schlagwörter

Stichwörter der Autor:innen

aggregate interlockairportfinite element modelingload transferrigid pavement

Autor:innen und Institutionen

  • School of Science, Technology and Engineering, University of the Sunshine Coast, Sippy Downs, QLD 4556, Australia.

ORCID-Profile: Sean Jamieson, Greg White

Zitieren

APA

Jamieson, S., & White, G. (2026). Load Transfer Theoretical Analysis of a Rigid Aircraft Pavement Contraction Joint Using a Novel Approach for Crack Characterization. Materials, 19(2), 376. https://doi.org/10.3390/ma19020376

Vancouver

Jamieson S, White G. Load Transfer Theoretical Analysis of a Rigid Aircraft Pavement Contraction Joint Using a Novel Approach for Crack Characterization. Materials. 2026;19(2):376. doi:10.3390/ma19020376

BibTeX
@article{Jamieson2026,
  author = {Jamieson, Sean and White, Greg},
  title = {Load Transfer Theoretical Analysis of a Rigid Aircraft Pavement Contraction Joint Using a Novel Approach for Crack Characterization},
  journal = {Materials},
  year = {2026},
  volume = {19},
  number = {2},
  pages = {376},
  doi = {10.3390/ma19020376}
}
Kostenlos starten →