EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Phase Diagrams and Thermal Properties of Fatty Acid Ternary Eutectic Mixtures for Latent Heat Thermal Energy

Dongyi Zhou iD, Fanchen Zhou, Jiawei Yuan, Zhifu Liu, Yicai Liu

Materials · 16.01.2026 · 19 (2) · 356

DOI: 10.3390/ma19020356 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Materials, online erschienen am 16.01.2026. Verfasst von Dongyi Zhou und 4 weiteren Autor:innen. Beteiligte Einrichtung: School of Energy and Mechanical Engineering, Hunan University of Humanities, Science and Technology, Loudi 417000, China. Die Arbeit wurde bisher 3-mal zitiert (Crossref) und nennt 36 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: This research was funded by the Ningbo Longhui Electromechanical Engineering Co., Ltd, Ningbo Longhui Electromechanical Engineering Co., Ltd..

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

This study utilized capric acid (CA), lauric acid (LA), myristic acid (MA), palmitic acid (PA), and stearic acid (SA) as alternative feedstocks to conduct theoretical analyses on ten fatty acid-based ternary eutectic systems. By leveraging the Schrader equation, phase diagrams for each system were constructed, and their theoretical eutectic points were calculated. The CA-LA-MA (capric acid–lauric acid–myristic acid) ternary system was selected as a representative for experimental fabrication: differential scanning calorimetry (DSC) was employed to characterize its thermal properties, while Fourier transform infrared spectroscopy (FT-IR) and thermogravimetric analysis (TGA) were used to assess its functional group composition and thermal stability, respectively. Theoretical calculations indicate that the ten ternary eutectic systems exhibit melting temperatures ranging from 17.11 °C to 37.61 °C, with phase change latent heats spanning 167.8 J·g−1 to 189.6 J·g−1. For the CA-LA-MA system, experimental DSC results confirm that its eutectic melting temperature is 16.0 °C (accompanied by a phase change latent heat of 177.0 J·g−1, with minor deviations from theoretical predictions attributed to reagent impurities and operational errors). TGA characterization further reveals that the CA-LA-MA mixture has an initial weight loss temperature (corresponding to ~1% mass loss) of 115.6 °C and an extrapolated onset weight loss temperature of 164.8 °C, confirming reliable thermal stability below 100 °C—consistent with its low-temperature application design. These results validate the consistency between theoretical predictions and experimental data, and demonstrate that fatty acid-based ternary eutectic mixtures are promising candidates for low-temperature thermal energy storage applications.

Schlagwörter

Stichwörter der Autor:innen

fatty acidphase diagramsternary eutectic mixturesthermal properties

Autor:innen und Institutionen

  • School of Energy and Mechanical Engineering, Hunan University of Humanities, Science and Technology, Loudi 417000, China.
  • Ningbo Longhui Electromechanical Engineering Co., Ltd., Ningbo 315000, China.
  • School of Energy Science and Engineering, Central South University, Changsha 410083, China.

ORCID-Profile: Dongyi Zhou

Förderung

  • This research was funded by the Ningbo Longhui Electromechanical Engineering Co., Ltd
  • Ningbo Longhui Electromechanical Engineering Co., Ltd.

Zitieren

APA

Zhou, D., Zhou, F., Yuan, J., Liu, Z., & Liu, Y. (2026). Phase Diagrams and Thermal Properties of Fatty Acid Ternary Eutectic Mixtures for Latent Heat Thermal Energy. Materials, 19(2), 356. https://doi.org/10.3390/ma19020356

Vancouver

Zhou D, Zhou F, Yuan J, Liu Z, Liu Y. Phase Diagrams and Thermal Properties of Fatty Acid Ternary Eutectic Mixtures for Latent Heat Thermal Energy. Materials. 2026;19(2):356. doi:10.3390/ma19020356

BibTeX
@article{Zhou2026,
  author = {Zhou, Dongyi and Zhou, Fanchen and Yuan, Jiawei and Liu, Zhifu and Liu, Yicai},
  title = {Phase Diagrams and Thermal Properties of Fatty Acid Ternary Eutectic Mixtures for Latent Heat Thermal Energy},
  journal = {Materials},
  year = {2026},
  volume = {19},
  number = {2},
  pages = {356},
  doi = {10.3390/ma19020356}
}
Kostenlos starten →