EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Pore and Thermochemical Properties of Biochar Materials Produced from Moso Bamboo Under Different Carbonization Conditions

Hervan Marion Morgan, An-De Yan, Yong-Shun Lu, Chi-Hung Tsai, Wen-Tien Tsai iD

Materials · 13.01.2026 · 19 (2) · 310

DOI: 10.3390/ma19020310 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Materials, online erschienen am 13.01.2026. Verfasst von Hervan Marion Morgan und 4 weiteren Autor:innen. Beteiligte Einrichtung: Department of Tropical Agriculture and International Cooperation, National Pingtung University of Science and Technology, Neipu Township, Pingtung 91…. Die Arbeit wurde bisher 8-mal zitiert (Crossref) und nennt 41 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

In this study, moso bamboo (Phyllostachys edulis, PE) was pyrolyzed in a high-temperature carbonization furnace to produce porous biochar materials with high carbon contents under different carbonization temperatures (500, 600, 700, 800, and 900 °C) and heating rates (10 and 20 °C/min). Preliminary characterization of the PE precursor was conducted to evaluate its thermochemical properties, including proximate analysis, elemental analysis, and thermal decomposition behavior. The results indicated that PE biomass is a suitable precursor for biochar production at temperatures above 400 °C, owing to its low ash content (80%). The pore structure and thermochemical properties of PE-derived biochars were found to improve with increasing carbonization temperature. Optimal pore characteristics were achieved at 800 °C with a heating rate of 10 °C/min, resulting in a Brunauer–Emmett–Teller (BET) surface area of 496 m2/g and a total pore volume of 0.18 cm3/g. In contrast, biochars produced at a heating rate of 20 °C/min exhibited significantly higher carbon contents (90.7–95.7%) compared with those obtained at 10 °C/min (75.4–89.0%). This phenomenon was attributed to enhanced carbon volatilization associated with the longer residence time during slower heating. Observations from scanning electron microscopy (SEM) were consistent with the development of porous structures in the PE-based biochars.

Schlagwörter

Stichwörter der Autor:innen

biocharelemental analysismoso bamboopore propertythermochemical property

Autor:innen und Institutionen

  • Department of Tropical Agriculture and International Cooperation, National Pingtung University of Science and Technology, Neipu Township, Pingtung 912, Taiwan.
  • Department of Forestry, National Pingtung University of Science and Technology, Neipu Township, Pingtung 912, Taiwan.
  • Department of Resources Engineering, National Cheng Kung University, Tainan 701, Taiwan.
  • Graduate Institute of Bioresources, National Pingtung University of Science and Technology, Neipu Township, Pingtung 912, Taiwan.

ORCID-Profile: Wen-Tien Tsai

Zitieren

APA

Morgan, H. M., Yan, A. D., Lu, Y. S., Tsai, C. H., & Tsai, W. T. (2026). Pore and Thermochemical Properties of Biochar Materials Produced from Moso Bamboo Under Different Carbonization Conditions. Materials, 19(2), 310. https://doi.org/10.3390/ma19020310

Vancouver

Morgan HM, Yan AD, Lu YS, Tsai CH, Tsai WT. Pore and Thermochemical Properties of Biochar Materials Produced from Moso Bamboo Under Different Carbonization Conditions. Materials. 2026;19(2):310. doi:10.3390/ma19020310

BibTeX
@article{Morgan2026,
  author = {Morgan, Hervan Marion and Yan, An-De and Lu, Yong-Shun and Tsai, Chi-Hung and Tsai, Wen-Tien},
  title = {Pore and Thermochemical Properties of Biochar Materials Produced from Moso Bamboo Under Different Carbonization Conditions},
  journal = {Materials},
  year = {2026},
  volume = {19},
  number = {2},
  pages = {310},
  doi = {10.3390/ma19020310}
}
Kostenlos starten →