EUVIMEDEUVIMED entdecken
ÜbersichtsarbeitOpen Access · CC BY 4.0

Advanced High-Strength Medium-Manganese Steels as an Alternative to Conventional Forging Steels: A Review

Aleksandra Kozłowska iD, Anna Wojtacha iD

Materials · 28.12.2025 · 19 (1) · 109

DOI: 10.3390/ma19010109 ↗

Kurz gefasst

Übersichtsarbeit in der Zeitschrift Materials, online erschienen am 28.12.2025. Verfasst von Aleksandra Kozłowska und 1 weiteren Autor:innen. Beteiligte Einrichtung: Department of Engineering Materials and Biomaterials, Faculty of Mechanical Engineering, Silesian University of Technology, 18A Konarskiego Street, 4…. Die Arbeit wurde bisher 6-mal zitiert (Crossref) und nennt 131 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Centre for Research and Development.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

This review highlights conventional forging steels and advanced medium-Mn steels containing retained austenite (RA), emphasizing their potential for industrial forging applications. Modern steels intended for forgings are required to combine strength, ductility, toughness and fatigue resistance with good hardenability and machinability at minimal cost. Medium-Mn multiphase steels fulfill these requirements by the strain-induced martensitic transformation (SIMT) of fine, lath-type RA, which can create a strength–ductility balance. Ferritic–austenitic steels provide high ductility with moderate strength, martensitic–austenitic steels show very high strength at the expense of ductility, and bainitic–austenitic steels achieve intermediate properties. Impact toughness and fatigue resistance are strongly influenced by the morphology of RA. The lath-type RA enhances energy absorption and delays crack initiation, while blocky RA may promote intergranular fracture. Low carbon (0.2–0.3 wt.%) combined with elevated manganese (3–7 wt.%) contents provides superior hardenability and machinability, enabling cost-effective air-hardening of components with various cross-sections. Advanced medium-Mn steels provide a superior mechanical performance and economically attractive solution for modern forgings, exceeding the limitations of conventional steel grades.

Schlagwörter

Stichwörter der Autor:innen

advanced high-strength steelautomotive forgingscrack resistancefatigue behaviorimpact toughnessmedium-Mn steelretained austenite

Autor:innen und Institutionen

  • Department of Engineering Materials and Biomaterials, Faculty of Mechanical Engineering, Silesian University of Technology, 18A Konarskiego Street, 44-100 Gliwice, Poland.

ORCID-Profile: Aleksandra Kozłowska, Anna Wojtacha

Förderung

  • National Centre for Research and Development

Zitieren

APA

Kozłowska, A., & Wojtacha, A. (2025). Advanced High-Strength Medium-Manganese Steels as an Alternative to Conventional Forging Steels: A Review. Materials, 19(1), 109. https://doi.org/10.3390/ma19010109

Vancouver

Kozłowska A, Wojtacha A. Advanced High-Strength Medium-Manganese Steels as an Alternative to Conventional Forging Steels: A Review. Materials. 2025;19(1):109. doi:10.3390/ma19010109

BibTeX
@article{Kozowska2025,
  author = {Kozłowska, Aleksandra and Wojtacha, Anna},
  title = {Advanced High-Strength Medium-Manganese Steels as an Alternative to Conventional Forging Steels: A Review},
  journal = {Materials},
  year = {2025},
  volume = {19},
  number = {1},
  pages = {109},
  doi = {10.3390/ma19010109}
}
Kostenlos starten →