EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Effects of SiC Particle Size on SiCp/Al Composite During Vacuum Hot Pressing

Ruijie Feng, Haibo Wu, Huan Liu, Yitian Yang, Bingbing Pei, Jianshen Han, Zehua Liu, Xishi Wu iD, Zhengren Huang

Materials · 25.12.2025 · 19 (1) · 84

DOI: 10.3390/ma19010084 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Materials, online erschienen am 25.12.2025. Verfasst von Ruijie Feng und 8 weiteren Autor:innen. Beteiligte Einrichtung: Ningbo Institute of Materials Technology and Engineering, Chinese Academy of Sciences, Ningbo 315201, China. Die Arbeit wurde bisher 3-mal zitiert (Crossref) und nennt 25 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: “Pioneer” and “Leading Goose” R&D Program of Zhejiang, Youth Innovation Promotion Association CAS, Yongjiang Talent Introduction Program.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

High-performance SiCp/Al composites were fabricated via a vacuum hot-pressing powder metallurgy process. The effects of SiC particle size on the composite microstructures and their thermal and mechanical properties were systematically investigated. The vacuum hot-pressed SiCp/Al composites exhibited a well-bonded interface between the SiC particles and Al matrix, while not exhibiting any Al4C3 brittle phase. Particle gradation effectively enhanced the densification of SiCp/Al composites, resulting in dense bulks with a relative density of 99.7%. When the SiC particle size increased from 5 to 50 μm, the fracture morphologies gradually transitioned from intergranular to transgranular, while the relative density, bending strength, and thermal conductivity increased. Overall, SiCp/Al composites with excellent thermal conductivity (201.42 W/(m·K)) and bending strength (523 ± 29.45 MPa) were obtained. To address the scarcity of research on SiCp/Al composites’ thermal properties, this study establishes SiC size/gradation–property relationships, innovatively filling the gap in thermal performance regulation.

Schlagwörter

Stichwörter der Autor:innen

SiCp/Almechanical propertymicrostructureparticle gradationthermal property

Autor:innen und Institutionen

  • Ningbo Institute of Materials Technology and Engineering, Chinese Academy of Sciences, Ningbo 315201, China.

ORCID-Profile: Xishi Wu

Förderung

  • “Pioneer” and “Leading Goose” R&D Program of Zhejiang
  • Youth Innovation Promotion Association CAS
  • Yongjiang Talent Introduction Program
  • S&T Innovation 2025 Major Special Program of Ningbo

Zitieren

APA

Feng, R., Wu, H., Liu, H., Yang, Y., Pei, B., Han, J., Liu, Z., Wu, X., & Huang, Z. (2025). Effects of SiC Particle Size on SiCp/Al Composite During Vacuum Hot Pressing. Materials, 19(1), 84. https://doi.org/10.3390/ma19010084

Vancouver

Feng R, Wu H, Liu H, Yang Y, Pei B, Han J, et al. Effects of SiC Particle Size on SiCp/Al Composite During Vacuum Hot Pressing. Materials. 2025;19(1):84. doi:10.3390/ma19010084

BibTeX
@article{Feng2025,
  author = {Feng, Ruijie and Wu, Haibo and Liu, Huan and Yang, Yitian and Pei, Bingbing and Han, Jianshen and Liu, Zehua and Wu, Xishi and Huang, Zhengren},
  title = {Effects of SiC Particle Size on SiCp/Al Composite During Vacuum Hot Pressing},
  journal = {Materials},
  year = {2025},
  volume = {19},
  number = {1},
  pages = {84},
  doi = {10.3390/ma19010084}
}
Kostenlos starten →