EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Possibility of High-Speed Ultrasonic Detection of the Internal Material Defects in Rails

Leszek Chałko iD, Łukasz Antolik iD, Mirosław Rucki iD, Miroslav Trochta iD

Materials · 20.12.2025 · 19 (1) · 28

DOI: 10.3390/ma19010028 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Materials, online erschienen am 20.12.2025. Verfasst von Leszek Chałko und 3 weiteren Autor:innen. Beteiligte Einrichtung: Faculty of Mechanical Engineering, Casimir Pulaski Radom University, Stasieckiego 54, 26-600 Radom, Poland. Die Arbeit wurde bisher 2-mal zitiert (Crossref) und nennt 27 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Polish National Centre for Research and Development.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Quick and reliable in situ non-destructive assessment of the material structure is especially critical in the case of measurement of rail defects concerning the demands of quick, uninterrupted transportation and safety. This paper presents the test results of a patented measuring head that is able to perform ultrasonic rail defect detection at speeds of up to 120 km/h. The experimental data was collected and discussed. Statistical analysis was performed in terms of bottom echo drop as a function of velocity, pressing force, and film thickness between the sensor and the rail material surface, as well as the coupling fluid stream intensity. The results proved the feasibility of the device for usage at high speeds for the state monitoring of rails in service.

Schlagwörter

Stichwörter der Autor:innen

non-destructive testingrail monitoringultrasonic inspection

Autor:innen und Institutionen

  • Faculty of Mechanical Engineering, Casimir Pulaski Radom University, Stasieckiego 54, 26-600 Radom, Poland.
  • Railway Research Institute, Chlopickiego 50, 04-275 Warsaw, Poland.
  • Institute of Mechanical Science, Faculty of Mechanics, Vilnius Gediminas Technical University, 11 Sauletekio al., LT-10223 Vilnius, Lithuania.
  • Faculty of Mechanical Engineering, VSB-Technical University of Ostrava, 17. listopadu 2172/15, 70800 Ostrava, Czech Republic.

ORCID-Profile: Leszek Chałko, Łukasz Antolik, Mirosław Rucki, Miroslav Trochta

Förderung

  • Polish National Centre for Research and Development

Zitieren

APA

Chałko, L., Antolik, Ł., Rucki, M., & Trochta, M. (2025). Possibility of High-Speed Ultrasonic Detection of the Internal Material Defects in Rails. Materials, 19(1), 28. https://doi.org/10.3390/ma19010028

Vancouver

Chałko L, Antolik Ł, Rucki M, Trochta M. Possibility of High-Speed Ultrasonic Detection of the Internal Material Defects in Rails. Materials. 2025;19(1):28. doi:10.3390/ma19010028

BibTeX
@article{Chako2025,
  author = {Chałko, Leszek and Antolik, Łukasz and Rucki, Mirosław and Trochta, Miroslav},
  title = {Possibility of High-Speed Ultrasonic Detection of the Internal Material Defects in Rails},
  journal = {Materials},
  year = {2025},
  volume = {19},
  number = {1},
  pages = {28},
  doi = {10.3390/ma19010028}
}
Kostenlos starten →