EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Evaluation of the Effect of Temperature (20–700 °C) on the Properties of Prestressing Steel Using AE Signals and FEM Analysis

Anna Adamczak-Bugno iD, Sebastian Michał Lipiec iD, Jakub Adamczak

Materials · 20.12.2025 · 19 (1) · 23

DOI: 10.3390/ma19010023 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Materials, online erschienen am 20.12.2025. Verfasst von Anna Adamczak-Bugno und 2 weiteren Autor:innen. Beteiligte Einrichtung: Faculty of Civil Engineering and Architecture, Kielce University of Technology, Av. 1000-An. of Polish State 7, 25-314 Kielce, Poland. Die Arbeit wurde bisher 4-mal zitiert (Crossref) und nennt 57 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Ministry of Science and Higher Education, Minister of Science of Poland.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The study presents a comprehensive analysis of the effects of high temperatures (500 °C and 700 °C) on the microstructure, mechanical properties, and acoustic emission (AE) parameters of cold-drawn prestressing steel. The investigations included mechanical testing, AE signal acquisition, and numerical verification using the finite element method (FEM). It was demonstrated that increasing temperature leads to significant microstructural changes (pearlite spheroidisation, carbide coarsening), resulting in strength degradation and a shift in the failure mechanism from quasi-brittle (initial state) to transitional (500 °C), and finally to ductile (700 °C). For the first time, AE parameters (Counts to Peak and RA-value) were correlated with local axial strains ε22 and von Mises equivalent stress, enabling the identification of the moment of onset load-bearing capacity loss and the determination of critical material damage thresholds. A multi-criteria diagnostic indicator was proposed to assess the condition of prestressing steel after fire exposure. The results confirm the high potential of AE as a non-invasive tool for evaluating the safety of prestressing tendons and cables in reinforced concrete structures subjected to overheating or fire.

Schlagwörter

Stichwörter der Autor:innen

acoustic emission methodfinite element methodprestressing steelstress and strain curveuniaxial tensile test

Autor:innen und Institutionen

  • Faculty of Civil Engineering and Architecture, Kielce University of Technology, Av. 1000-An. of Polish State 7, 25-314 Kielce, Poland.
  • Faculty of Mechatronics and Mechanical Engineering, Kielce University of Technology, Av. 1000-An. of Polish State 7, 25-314 Kielce, Poland.

ORCID-Profile: Anna Adamczak-Bugno, Sebastian Michał Lipiec

Förderung

  • Ministry of Science and Higher Education
  • Minister of Science of Poland

Zitieren

APA

Adamczak-Bugno, A., Lipiec, S. M., & Adamczak, J. (2025). Evaluation of the Effect of Temperature (20–700 °C) on the Properties of Prestressing Steel Using AE Signals and FEM Analysis. Materials, 19(1), 23. https://doi.org/10.3390/ma19010023

Vancouver

Adamczak-Bugno A, Lipiec SM, Adamczak J. Evaluation of the Effect of Temperature (20–700 °C) on the Properties of Prestressing Steel Using AE Signals and FEM Analysis. Materials. 2025;19(1):23. doi:10.3390/ma19010023

BibTeX
@article{AdamczakBugno2025,
  author = {Adamczak-Bugno, Anna and Lipiec, Sebastian Michał and Adamczak, Jakub},
  title = {Evaluation of the Effect of Temperature (20–700 °C) on the Properties of Prestressing Steel Using AE Signals and FEM Analysis},
  journal = {Materials},
  year = {2025},
  volume = {19},
  number = {1},
  pages = {23},
  doi = {10.3390/ma19010023}
}
Kostenlos starten →